Marble Pinball
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small pinball machine that uses standard 16mm marbles.
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 65
- Makes
- 0
- Views
- 452
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
General
Please use the Tolerance-Test to select the appropriate Bolt. The bolt should be able to be screwed into the tolerance-test by hand without tools.
Please also follow the printing recommendations, especially for the Bolts.
Although the pinball machine is designed for 16mm marbles, smaller ones should still work.
If you have any problems or questions, just leave a comment.
Printing
I recommend printing the bolts in PETG with 4 walls, as layer adhesion is critical.
All parts can be printed without supports and are already properly oriented.
Assembly
Parts needed(setup in the picture):
2x M3x12 Cylinder head screw (optional, the parts can be glued)
2x rubber band
1x Pinball-mainbody
1x Catcher
1x Left-Flipper
1x Right-Flipper
2x Spinner
1x Upper-Bumper
1x Lower.Bumper
8x Bolt
You need to secure the pinball main body and the catcher using the M3x12 screws, or glue the two parts together.
Next, insert the rubber band into both flippers, the tension can be adjusted by changing the length and the number of loops.
The elastic band is then hooked into the designated slot on the catcher.
Next, secure both flippers with the bolts. Tighten the bolts gently.
The remaining parts can simply be secured with the bolts.