Funko Bitty Pop Retainer / Case Guard (MULTIPLE SIZES)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keeps your Bitty Pops held inside the case. 0.5mm - 1.0mm thicknesses.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 8
- Makes
- 0
- Views
- 172
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
The original design works very well, but there were some tolerance issues with my figurines. I made a few different sizes to compensate for this.
For instructions, please refer to the original model
I have also included my Fusion model. There is a parameter for "thickness" - if you need another size, just change this.
BEWARE - your layer height (and first layer height) will affect the efficacy of this. Use a variable layer height or make sure your layer height is a multiple of the thickness.
THE INCLUDED 3MF HAS LAYER HEIGHT MODIFIERS TO ENSURE THE CORRECT THICKNESS OF CRITICAL DIMENSION.
For example, if I am printing the 0.5mm version, a 0.10mm layer height with 0.20mm first layer would be okay
0.20mm + (0.10mm*3) = 0.50 mm
If it were the 0.6mm version, a 0.20mm layer height with 0.20mm first layer.
0.20mm + (0.20mm*2) = 0.60 mm
If you use the Fusion model to make a 0.65mm version, you will need to adjust the layer height values OR use variable height.
0.20mm + (0.15mm*3) = 0.65 mm