Sand Dollar Necklace Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My wife needed something to hang necklaces on, and likes sand dollars. Viola!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Sand Dollar Necklace Hanger
This simple hanger is designed with seven hooks to hold necklaces. The second part is designed for the lower part of the necklace so you can hang it on a cabinet door like my wife wanted to and the necklaces won’t swing too much when the door is opened. I would recommend using the command strip version, but there is a version with screw holes in it just in case you need that.
Printing:
Use enough walls to make the hooks solid, other than that it doesn’t matter much. I used a concentric top infill pattern for the look.
Hanging:
Use a command strip or two to hang each part, or use the version with screw holes in it. I have not printed the screw hole version, but the holes are 3mm in diameter so choose your screws appropriately. The hole for the screwdriver in the bottom piece is 5mm.
Happy printing!