IKEA Tisken shower hose mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shower hose hanger mod for the IKEA Tisken suction cups
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a long shower hose and keeping it from the shower floor has been hard with a standard Tisken hanger because the flat surface of its hanger part didn't hold the hose. This mod is designed for a hose with a 14mm outside diameter, and a 12.5mm diameter inside the grooves. The model contains 3 ridges which fit into the periodic grooves on the hose for maximum hold.
Print with 0.2mm layer height, flip the model so the U-shape is upside down (looks like a bridge), using supports on the build plate. I also set 4 perimeters both horizontally and vertically to make it a bit more water tight.