1 / 1
K1C 12032 Fan Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Convert the stock 6025 chamber fan to a 12032 fan
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 7
- Makes
- 0
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
[temperature_fan chamber_fan]
pin: PC0
cycle_time: 0.0100
hardware_pwm: false
max_power: 0.8 # Change a lower value if it's too loud.
shutdown_speed: 0
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC5
min_temp: 0
max_temp: 70
control: pid
pid_Kp: 25.0 # Replace this to 25
pid_Ki: 5.0 # Replace this to 5
pid_Kd: 70.0 # Replace this to 70
target_temp: 0.0 # Set default to 0 so it won't run when not printing
max_speed: 1.0
min_speed: 0.0BOM
3×5×4 copper insert × 2 For fan (Top left & Bottom right)
M3×8mm SHCS × 1 For the mounting the fan on the duct
M3×10mm BHCS × 1 For mounting the fan at back panel
Warning: If you have a too (High power) fan, connect it dierectly on the (stock chamber-fan) port might fry your mainboard!!