1,25" filter adapter for Seestar S50
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use your 1.25" filters with Seestar S50
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Public Domain
Simple design that reuses the approach of a dust cover with the threaded hole in the center to fit the 1.25" filters.
Print with PLA or PETG, ideally 0.10mm layer. When using ASA, beware of shrinkage.
EDIT: added two more models with the nose, that would snap the adapter off your Seestar if you forget it in place and close the arm (or when shooting using Plan feature - it closes the arm at the end automatically). Place it on the telescope with nose down, try slowly when using for the first time to see if it works with your print (adapter may sit too firm and the nose could break in some cases, but mine works well). Use it as a safety feature to protect your device, not as a standard way of removing the adapter.
Printing the model with angled nose requires supports.