Counting matching models…
Please Note: Come back here often and be sure to download the latest build instructions before printing and building your mount as I am fixing errors and omissions regularly. Please give me your feedback so I can make this project better…
Seestar S30 Powerbank holder. Holds your powerbank on your S30 for all night sessions. Attaches to the side for easy connection of your USB powerbank. Allows extended imaging sessions even using Dew Heater.
Hello, I’m offering accessory files for the ZWO Seestar S50. The baffle is compatible with Seestar S50 filters and does not cause any vignetting. ⚠ Warning: the baffle must be printed with tree supports. Clear skies! The pack includes: 1…
These are alternative models of Diffraction spikes to use on SeestarS50
Seestar S30 power bank holder designed to keep your power bank securely mounted during long imaging sessions. It attaches to the side of the S30, allowing easy connection of a USB power bank. This enables extended astrophotography…
I needed a dovetail mount to use my Seestar S30 Pro telescope in equatorial mode, and I found several models, but none of them quite met my requirements. So, I took the measurements of the dovetail mount from my StarAdventurer and…
Upgrade your SeeStar S50 with our custom 3D printed anti-dew shield! This sleek black cylindrical attachment helps prevent moisture buildup on your telescope's optics, ensuring clear views even in humid conditions. Precisely designed to…
This is simple adapter for new solar filter. I used Baader solar film I had home. Design is based on the original solar filter.
This accessory securely attaches a battery pack to your Seestar S50, which prevents cords from getting tangled as you spend a long night taking beautiful pictures of the sky. Filament - PLA or PLA +, if you're going to use in the Sun then…
Remix of the Dew shield from SeeStar S50 Accessory Set by Lordwhiteley to support the mask/defraction spike clips from the ZWO Seestar S50 (Lens cap, Levelling pads and accessories set) by All-Pixels . I'd already printed All-Pixel's kit…
Beschreibung in deutscher Sprache weiter unten: This adapter allows easy and quick mounting of a Seestar S50 telescope on your stable Celestron telescope stand without having to make a change at the Seestar or your Celestron tripod. In…
For the SeeStar S50 automated telescope - a screw together filter holder for standard 48mm X 0.75 pitch thread astronomy filters like the Lumicon DeepSky filter, with a dew shield and dust covers for both ends. The dew shield screws onto…
Holder for a polar finder scope for the SeeStar S50 which can be scaled to fit any polar finder scope. The pole is not really Polaris, so a red dot finder lined up with Polaris is not accurate. Polar scopes provide the offset needed for a…
UPDATE: I made a new adjustable adapter that I think is better, check it out here: https://www.printables.com/model/1180078-zwo-seestar-s30-s50-equatorial-eq-wedge-adapter-ad This adapter aids in balancing a ZWO Seestar S30 or S50 smart…
Vixen dovetail bars for ZWO Seestar S30 and S50 smart telescopes. I made these in both 60mm and 90mm lengths. The 60mm lengths are good for most of the EQ wedge adapters on the market and the 90mm length is good for the William Optics EQ…
Fall-away, baffled dew shield for SeeStar S50. Print both parts, glue them together, and (optionally) paint the whole thing flat black. IMPORTANT: Print the cone part with X and Y (not Z) scaled to 104% for a good fit (and to avoid…
Spindle and spacer for a do-it-yourself tripod counterbalance (to counterbalance a SeeStar S50 mounted on an equatorial wedge such as the Skywatcher Adventurer). The 3D-printed parts are the spindle ("barbell core") and a spacer disk (to…
This adapter aids in balancing a ZWO Seestar S30 or S50 smart telescope over the center of gravity of the tripod when used in equatorial (EQ) mode using an adjustable EQ wedge. Say goodbye to field rotation and hello to zenith imaging…
This is a fall-away dew shield for the SeeStar S50, specifically designed for the soon-to-be-released equatorial mode. It includes an sloped shelf, angled for a specific latitude, so you can flip the shield around 180 degrees, mount it on…
Warning, this ONLY works with the ZWO Seestar S50 dew/light shield - baffled. Make sure to print that part separately first before printing this one. Simple yet efficient spike diffraction mask made specifically to fit in dew shield.…
Please Note: Come back here often and be sure to download the latest build instructions before printing and building your mount as I am fixing errors and omissions regularly. Please give me your feedback so I can make this project better…
This is a 3D printed fixed equatorial wedge for the ZWO SeeStar S50 telescope. It is supposed to be mounted between the ZWO provided tripod and the telescope itself and lets you use it in equatorial mode, without the field rotation…
it should fit perfectly to the pipes of the tripod. At least it fits for me. The picture is from old model. I edited it a little bit to be perfectly fitting the anti-slip rubber. Support not needed. Printed it with 6 walls and 30% infill…
Just print with the flat end on the print bed. Printing Tips: Just print with the flat end on the print bed. You can add a raft if you're concerned about bed adhesion. Filament - PLA or PETG works well. Infill - 15%-100% which ever is…
Seestar S30 Powerbank holder. Holds your powerbank on your S30 for all night sessions. Attaches to the side for easy connection of your USB powerbank. Allows extended imaging sessions even using Dew Heater.
Seestar S30 Fall-Away Dewshield and Masks-Stop worrying about shutting down with the dewshield installed! Version 1.2 has a longer front plate so that it won't jam in EQ mode! When I bought my Seestar S50, I had to buy this equipment ($70…
A simple wedge for the Seestar S50 that can be used at different latitudes. You just need a 3/8-16x1 screw and a 3/8 nut. The nut can be adjusted to 12 positions so that one leg is always pointing north. A tool to tighten the bolt is…
Simple tripod support for the Seestar s50. Designed to go on weight bearing leg of the Seestar s50 in eq mode.
This is a laser holder for Vixen dovetails. This can be used to help polar align equatorial (EQ) mounts. This version is the right-angle model which is particularly useful for ZWO Seestar smart telescopes, due to the position that the…
When mounting a SeeStar S50 to the Sky-Watcher EQ base, the knob to tighten the dovetail block to the EQ mount will not fit because it hits the bottom of the S50. Many videos show using a long bolt to move the knob out from under the S50,…
Tried to make a slightly different Dew Shield for the SeeStar S50 in testing I’ve found this to provide faster and clearer images in my testing. Results may vary. model was printed in Matt Black PLA and no supports where needed.
ZWO Seestar S50 baffled light/dew shield for use with 2-inch (M48x0.75) filters. This baffled light/dew shield is an interference fit and slides into place. I've added spring-loaded tangs to help to grip the Seestar. Remember to remove it…
Tripod for Seestar and others I wanted to be able to get my Seestars up off the ground. I designed this simple tripod to do the trick. It uses all PLA. I used PLA Glow on the leg connectors and feet so that it shows up better at night.…
Accessories Box for the kit of utils create by Lordwhiteley ! Seestar Accessories Set: https://www.thingiverse.com/thing:6752376 This is one of the best accessories kit available for the Seestar S50, period! The dew filter is a bit wider,…
A slightly modified version of gbirk's riser model that raises the Seestar up above the oversized knob on the SkyWatcher EQ wedge clones. I didn't have a place to keep a quarter handy for attaching the riser. This remix lets you store a…
@Gbirk's mount design fitted perfectly on one of my two Skywatcher Wedges, for the second one it was just a little bit to big. Remixed it by removing about 1.5mm from the dovetail-part of the model, works fine now
Hello, I’m offering accessory files for the ZWO Seestar S50. The baffle is compatible with Seestar S50 filters and does not cause any vignetting. ⚠ Warning: the baffle must be printed with tree supports. Clear skies! The pack includes: 1…
ULTIMO AGGIORNAMENTO Ho aggiunto il manuale di montaggio sia in italiano che in inglese che renderà sicuramente più semplice l'assemblaggio delle componenti stampate e le viterie varie. Aggiornamento. Ho modificato diverse cose tra cui la…
simple battery holder to increase the "sky time". in this case optimized for the following power bank einfacher Halter für einen Akku um die Beobachtungszeit zu verlängern. In diesem Fall optimiert für folgende Powerbank…
Seestar TC20 Tripod - Level Assist This is a basic leveling adapter designed for the TC20 tripod . It helps with quick adjustments to level the tripod, whether the legs are extended or collapsed. It’s not an original idea but a redesigned…
Remixed version of drhollen's ZWO Seestar S50 light/dew shield - baffled that is automatically pushed off if the scope closes while it's fitted. I heated the top of the collar (opposite the push off tab so I could flex it to give a snug…
Power Bank montabile solidamente su Seestar S30, monta su qualsiasi treppiede o testa equatoriale con vite 3/8 di pollice Una sola vite testa brugola M3 X16 mm e relativo dado autobloccante. LO spazio utile per il power bank è 72 X 28 mm…
Filtro solare magnetico per ZWO Seestar S30. Ho usato una pellicola BAADER Astrosolar di densità 5.0 La parte metallica è composta da una graffettta grande (diametro filo 1.2 mm) tagliata e piegata al meglio con delle pinzette che poi va…
Paraluce magnetico per ZWO Seestar S30. necessita di 2 magnetini di diametro 5 mm X 1.5 mm. Con la presenza dei magneti il paraluce rimane stabile anche in caso di vento.
Copriobbiettivo magnetico specifico per Seestar S30, va corredato con 2 magneti cilindrici diametro 5 X 1,5 mm Permette un aggancio saldo e stabile.
This support is designed specifically to mount an INIU power bank directly onto the Seestar S50, providing a clean, stable, and cable-efficient power solution during observations and imaging sessions. The support has been engineered to…
Version 2 is a much improved model. The area around magnet has been thinned for better connection and the hole is a tighter fit with the solar filter. Printed with Petg.
The Seestar S50 does not ship with a dust cover, therefore the lens is always exposed, so I created this dust cover to slot into the lens aperture to protect it. I suggest printing with PETG in order to give it a little flex, the fit…
Remixed Seestar S30 dust cap with Bahtinov slit pattern, smoothed edges, and thanks to the original creator.
Made with PetG, fine detail print settings.
Dew/light pollution shield for the Seestar S30. Friction fit.
S30 pro arrived. Wanted a dust cover. The S30 one works but does not cover telephoto lens. Modified lifour S30 Dust Cover in Fusion360 to fit better. Works okay. Better in Pla Pro or Petg. Version was updated. Has rounded bottom and more…
These are alternative models of Diffraction spikes to use on SeestarS50
Seestar S30 power bank holder designed to keep your power bank securely mounted during long imaging sessions. It attaches to the side of the S30, allowing easy connection of a USB power bank. This enables extended astrophotography…
I needed a dovetail mount to use my Seestar S30 Pro telescope in equatorial mode, and I found several models, but none of them quite met my requirements. So, I took the measurements of the dovetail mount from my StarAdventurer and…
This is a remix from two different persons. https://www.thingiverse.com/thing:7322662 https://www.allenmaroney.com/allen/SeeStar/s50.htm
Upgraded version of my previous model featuring: ・longer legs ・added brim for easy print, ・8 degrees bending for maximal contact with ground ・screw hole for external weights and stabilization in EQ mode
This is a new feature for my Seestar tripod Extender v2 to easily add weights for the tripod while using the telescope in EQ mode. *1x Screw needed Tripod Extender can be found at this link:…
Simple design that reuses the approach of a dust cover with the threaded hole in the center to fit the 1.25" filters. Print with PLA or PETG, ideally 0.10mm layer. When using ASA, beware of shrinkage. EDIT: added two more models with the…
Downloadable digital files for the NANO DOME V2 , a 3D-printable clamshell dome designed for compact smart telescopes such as the ZWO Seestar S50 , Seestar S30 , Seestar S30 Pro , DwarfLab 2, 3 and mini The full assembly documentation…
The Seestar S50 becomes quite hot, when observing the sun. So I made a simple protection for the body which have to be glued together. The plate is printed at 0.3mm 20%, the holder at 0.2mm and 60%. Because the plate should be 270mm (if…
For manual focus on bright stars and objects, just align the crosshairs.
This model consists of several parts. A bottom that is to be put on your SeeStar S50. (Needs to be printed with supports) A Top that contains your filter. A spacer that can be used when you filter is thicker. Robust bottom and top cap to…
The Seestar S50 does not ship with a dust cover, therefore the lens is always exposed, so I created this dust cover to slot into the lens aperture to protect it. I suggest printing with PETG in order to give it a little flex, the fit…
ZWO Seestar S50 Filter Ring with M48 threads on them to attach any 2" filter to your ZWO Seestar. Yes, the Seestar comes with an integrated filter wheel, but what if you want to attach your own filters to it? I tested this successfully…
A dust cap and dew shield for the SeeStar 50. Designed in OpenSCAD so you can easily modify it. I printed mine in PETG with a .6 nozzle on my MK3S. You may need to modify OD to fit well depending on your 3D printer and settings.
Several reports indicate that Baader solar film provides better solar images than the solar filter provided by ZWO. Here are two designs for film holders done in OpenScad. They are slightly smaller in od to be easily inserted and removed…
Seestar S50 Solar ICE CO 55mm ND100000 MC Glass Filter holder for the Solar Eclipse. The glass filter is a force-fit. However it is easy removal from the Seestar for totality.
SeeStar Wall Mount for my observatory. This uses this Quick Release Plate Kit : https://www.amazon.com/dp/B0CFQCQ5TH Printing in PETG or stronger is recommended.
ZWO Seestar S50 dust plug/cap. This has a slight interference fit. Includes tab for easy removal. New updated design with multiple spring-loaded tangs along periphery to help hold it in place.
ZWO Seestar S50 light/dew shield - baffled. This light/dew shield is an interference fit and slides into place. Remember to remove it before shutting down the Seestar. This design has many baffles inside to help reduce light reflections.…
Solar finder for ZWO Seestar S50. Get ready for the April 8, 2024 total solar eclipse! This simple device can help you align your Seestar (with appropriate solar filter) towards the sun. If auto-tracking fails to find the sun, you can…
Seestar S50 slide on slide off solar filter. Designed to be able to quickly remove and reinstall the solar filter.
This is a sturdy power bank holder that will rotate with your scope so you don't have to worry about wires. Just slide the holder onto the main body of the scope. Inside clearance for the power bank is 100mmx20mm At 20% infill this holder…
The box can fit the original solar filter in the case (or anything else with the size of 67x67x15mm). Additionally it can fit the set of accessories made by PixelatedDad specifically: Custom Diffraction Mask (First slot after Solar…
The model was created via https://skeye.rocks/tools/mask/ according to Seestar's specs, hence the lower slit pitch, so that it is easier to focus on objects. The model also fits perfectly in my Accessories Box for Seestar . You may need…
** Preferred material: PLA Pro/Pro PLA+/PETG ** Use your 2" filter ring with my dew shield for your Seestar S50 telescope. I have designed a filter ring with an adapter that can fit my customized dew shield. The dew shield has an inner…
ZWO Seestar S50 filter adapter - for M48x0.75 (2 inch) threaded filters This simple filter adapter is threaded so you can screw in M48x0.75 threaded filters, the typical “2 inch” filters and the adapter slips into the Seestar S50…
Spacer for using the Seestar S50 on a Sky-Watcher Star Adventurer Tripod. Might want to print with a bright color, because you know you'll drop it in the grass at night. 34mm x 3mm, with 10mm hole for the mounting bolt.
ZWO Seestar S50 Bahtinov Mask A simple focusing aid for when manually focusing the ZWO Seestar S50. New updated design with spring-loaded tangs around the periphery to help hold the mask in place.
After using this for a while, it works fine, but I think the shield with baffles is not as useful as I guessed. Even the ‘flat’ plastics are kind of shiny, so really need either paint or felt flocking, so it's probably easiest to make the…
