Aimable HC-SR04 sonar ball-and-socket sonar mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for HC-SR04. Sonar is inserted into the box with an attached ball, and snaps into the mount with a socket.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Mount for HC-SR04. Screw socket mount to a corner. Insert HC-SR04 into sonar box, then attach the back. Snap the ball into the socket, and move ball in the socket as needed to aim the sonar. The texture of the ball and socket will hold the sonar in the desired position.
Print the socket-mount socket-side down. A brim and some supports may be necessary.
The box top and bottom can be printed without supports.
The back of the sonar box is attached with 4 M3-5mm screws.
OpenSCAD sources are online at https://github.com/chl33/Garage133/tree/main/scad/SonarBox.
Used in my Garage133 project.