Train Track Arch Bridge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Three piece arch bridge to replace parts or print as entire assembly.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Share Alike
Arch bridge for brio-style train tracks. I made this as three separate pieces so you can print only the piece you need or the whole set as you like. I had the two ramps but was missing the arch bridge, so I started with that and decided to model the whole thing. Both ramp styles can be printed to have a continuous male-female ends, or two of one style to have a male-male or female-female transition, conductor's choice.
Printing suggestions:
-Ramps can be printed as they rest normally, 2+ walls and ~10% infill is sufficient.
-Arch Bridge was designed such that it can print on its side with no supports. I would recommend 2+ walls printed with the Inner-Outer order to improve overhang quality.
This is my first published model and was fun to design and print. I welcome any and all feedback (especially if you know how long/tall the arch is actually supposed to be).
Update 7/16/2026 - I got measurements fro the standard arch bridge and modeled it too.