Train Track Arch Bridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three piece arch bridge to replace parts or print as entire assembly.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Share Alike
Arch bridge for brio-style train tracks. I made this as three separate pieces so you can print only the piece you need or the whole set as you like. I had the two ramps but was missing the arch bridge, so I started with that and decided to model the whole thing. Both ramp styles can be printed to have a continuous male-female ends, or two of one style to have a male-male or female-female transition, conductor's choice.
Printing suggestions:
-Ramps can be printed as they rest normally, 2+ walls and ~10% infill is sufficient.
-Arch Bridge was designed such that it can print on its side with no supports. I would recommend 2+ walls printed with the Inner-Outer order to improve overhang quality.
This is my first published model and was fun to design and print. I welcome any and all feedback (especially if you know how long/tall the arch is actually supposed to be).
Update 7/16/2026 - I got measurements fro the standard arch bridge and modeled it too.