Snapmaker U1 PSU Case Cover with 6015 Fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New case cover without fan grille.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 56
- Makes
- 0
- Views
- 613
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to Tareku for the PSU case cover.
I wanted a case cover without a fan grille—since that also generates noise—and a quieter fan. The mounting position for the 92 mm fan didn't seem ideal to me, as there are no vents in the printer casing at that spot; therefore, I retained the original position. To mount the fan, I used countersunk fan screws. I installed a GDSTIME GDA6015 Dual Ball Bearing 24V fan. I also installed a compartment divider with fan for Mobo, as well as a divider for the PSU compartment. I connected the Mobo/driver fan in parallel with PSU fan.
I can also recommend my other Snapmaker U1 modifications: