Snapmaker U1 PSU Case Cover with 6015 Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New case cover without fan grille.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 661
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to Tareku for the PSU case cover.
I wanted a case cover without a fan grille—since that also generates noise—and a quieter fan. The mounting position for the 92 mm fan didn't seem ideal to me, as there are no vents in the printer casing at that spot; therefore, I retained the original position. To mount the fan, I used countersunk fan screws. I installed a GDSTIME GDA6015 Dual Ball Bearing 24V fan. I also installed a compartment divider with fan for Mobo, as well as a divider for the PSU compartment. I connected the Mobo/driver fan in parallel with PSU fan.
I can also recommend my other Snapmaker U1 modifications: