Roland GK-3 Body Bracket for Carved Top Guitars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
GK-3 mount for carved top guitars. Strap lock screw mount, no mods needed. Felt pads protect your finish.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🚀 Support My Work🚀
If you enjoy my designs, you can help me keep the creative spark alive:
Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎
Like & Download: Your engagement helps my models reach more people.
Buy Me a Coffee: If you'd like to support my work and my family more directly.
A clean, tool-free mounting solution for the Roland GK-3 hex pickup on carved top guitars (PRS, Les Paul, and similar arched-body instruments), where the standard adhesive strip cannot lay flat due to the body curvature.
The bracket attaches directly to the existing strap lock screw on the lower bout — no drilling, no permanent modifications. The GK-3 pickup can be positioned near the bridge either with double-sided tape applied directly to the guitar body, or secured to the bracket itself using the dedicated mounting surface on the upper section, which slides under the bridge humbucker ring for a clean, integrated look.
Key features:
Strap lock screw mount — fits standard Schaller-style and compatible strap lock hardware
Recessed felt pad pockets on all contact surfaces — cut and glue your own felt pieces to protect the carved top finish from scratches
Low-profile design that keeps the GK-3 close to the strings for optimal tracking
Designed for carved/arched top guitars where flat adhesive mounting is not practical
No permanent modifications required — fully reversible installation
Print settings:
Material: PETG recommended (good layer adhesion, slight flex for a secure fit)
Layer height: 0.2 mm
Walls: 4 perimeters
Infill: 30% gyroid
Supports: not required
Orientation: flat side down
Hardware needed:
Self-adhesive felt sheet — cut to fit the recessed pockets