1 / 5
Flambeau 5007 Tuff Tainer Divider — image 1
1 / 5

Flambeau 5007 Tuff Tainer Divider

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These fit the new variant marked 2017

Rating
0 / 5
Likes
2
Downloads
16
Makes
0
Views
43
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

I got a good deal on these 5007 Flambeau Tuff Tainers for my kids to sort their extra Lego but they had the Zerust dividers which:

"consist of a proprietary chemical formulation that releases an invisible, odorless, tasteless, and FDA-safe vapor that diffuses throughout an enclosed Tuff Tainer and settles on all exposed metal surfaces to form a protective molecular layer that inhibits the electrochemical reactions that cause rust and corrosion to form"

I didn't like the idea of them inhaling the "safe vapour" so I printed some instead, they can inhale some PLA vapour instead.

It turns out they are much more finicky to fit than it would seem and the ones I found online I couldn't make work so I made my own. The Tuff Tainers also seem to have variances within each one so you can get some that fit tight and some that fit loose with the same divider. You get what you pay for I guess. They will be sensitive to different filaments so I recommend to print 1 and check fitment. You may need to change the brim gap as well if you get any layer shift at the top.

Some tips for printing these:

  • Print vertical

  • Use a bed with good adhesion

  • Don't print too close together

  • Make sure to check fit and adjust very slightly for different filament that might shrink more

  • A tight brim is better than a loose brim which will not hold it steady if printing multiples at once (trimming may be required)

  • Turn 90 degrees if using a bed slinger

  • Great way to use up the last bits of filament on a roll

  • Check that yours are the "2017 Flambeau Inc" version the 2016 apparently uses larger dividers (pictured)

Tags