Scallop | Low Hardware Magfed Foam Blaster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A super low hardware primary blaster with some optional hardware. Sealed and propelled by only 4mm string!
- Rating
- 3.333 / 5
- Likes
- 260
- Downloads
- 484
- Makes
- 3
- Views
- 6,361
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
Note: the mags in the glamour shots are not included, find the files for those here
This is an earlier blaster of my string driven plunger designs so it has some weird attributes like an oversized plungertube and other frankly stupid design choices. A dead end pretty much, but it works too well to discard so you can just have a go with it. If you end up liking it and you want to support me consider buying some of my other blaster files here
Overview:
Its cheap to make, with a bit over a kilo of filament and some string for propulsion and gaskets as the cheapest option.
Picatinny rail under the pumpgrip
Optional Aluminium barrel and Oring usage (See below for BOM)
Steps included so you can resize your seals or try other stuff with the system (Might just be a bunch of disjointed faces, my cad really doesnt like .step)
Printing and hardware:
180mm³ Printer required, you may have to angle long parts by 45° on your buildplate
No supports needed, 3 Walls and 20%Gyroid infill, unless otherwise specified in the folder name
4mm elastic string required (this stuff) (5/32" will work too)
needs straight worker talon mags example US example EU or printed equivalent (Thanlon, Superdrum etc.)
Optional Hardware:
Part
Amount
#029 Oring (Plunger/Ram Seal)
2
16/13mm Aluminium Barrel
~35cm