SKOTAT to SKÅDIS Adapter (IKEA Hack)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hidden adapter to mount an IKEA SKOTAT onto a SKÅDIS / SKADIS pegboard. Prints fast, finish hidden, holds solid.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A hidden adapter that mounts an IKEA SKOTAT onto a SKÅDIS pegboard. SKÅDIS peg hooks on one face, SKOTAT mounting interface on the other — bridging the gap IKEA never filled.
It sits behind the SKOTAT once mounted, so the finish is completely hidden. That means you can print it fast and rough — no need to fuss over surface quality on a part nobody sees. Mine's been holding solidly on my wall in daily use.
Print settings:
Material: PETG (ABS or ASA work equally well)
Infill: 20% gyroid
Orientation: on its side (best layer strength across the load path + cleanest peg geometry)
Supports: yes — organic/tree supports recommended
Brim: 3mm (the side orientation has a small footprint, so a brim keeps it stuck down)
Speed: print fast — it's a hidden structural part, surface finish is irrelevant
Fitted and in daily use on my own SKÅDIS wall.