SKOTAT to SKÅDIS Adapter (IKEA Hack)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hidden adapter to mount an IKEA SKOTAT onto a SKÅDIS / SKADIS pegboard. Prints fast, finish hidden, holds solid.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A hidden adapter that mounts an IKEA SKOTAT onto a SKÅDIS pegboard. SKÅDIS peg hooks on one face, SKOTAT mounting interface on the other — bridging the gap IKEA never filled.
It sits behind the SKOTAT once mounted, so the finish is completely hidden. That means you can print it fast and rough — no need to fuss over surface quality on a part nobody sees. Mine's been holding solidly on my wall in daily use.
Print settings:
Material: PETG (ABS or ASA work equally well)
Infill: 20% gyroid
Orientation: on its side (best layer strength across the load path + cleanest peg geometry)
Supports: yes — organic/tree supports recommended
Brim: 3mm (the side orientation has a small footprint, so a brim keeps it stuck down)
Speed: print fast — it's a hidden structural part, surface finish is irrelevant
Fitted and in daily use on my own SKÅDIS wall.