1 / 7
ECG Monitoring system with email and PC output — image 1
1 / 7

ECG Monitoring system with email and PC output

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a ECG Monitoring made with ESP32S3 and AD8232. Data can sent via email or displayed in a PC.

Rating
0 / 5
Likes
7
Downloads
16
Makes
0
Views
278
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Features:

Sampling Frequency: 250Hz

Two ways to send the data: via email or directly to PC (plotter serial, or any other program as serial studio). The output can be selected in the setup menu

In the email mode, after 30 seconds after pressing Save/Tx) the reading is sent to an email google account in csv format (the sending file will take up to 3 minutes, depending in wifi connection). To see the graph you can create in excel or in google colab.

In the start menu, there are the option to choose the Pause,speed, scale, record and return to the main menu.

The equipment is power with one Li 18650 battery .To charge it is done externally with a Li charger. Anyway, there is a dc jack to power optionally the equipment wit a DC of 9v-12v.

The box has two ports for usb C for programing (not implemented) and sd card port (not implemented). Battery compartment, connection of the electrodes, switch on/oof and dc jack for external poer supply

The program (ino) is designed speciffically for ESP32S3 Freenove and Breakout board and the Waveshare TFT 3.5”” screen. If you use another components you will have to adapt it to them. In the electrical diagram there are the connection pins and how to assembly the different parts. Is completely 100% functional!!

To create a new email account to obtain the ESP32S3 access key:

Log in to the settings of your newly created Google account.

Go to the Security tab.

Enable Two-Step Verification (you'll be asked to link a phone number).

Once enabled, search for "App Passwords" in the search bar at the top.

Create a new password and name it something like "ESP32_ECG".

Copy the 16-letter yellow code that Google displays on the screen (save it in a notepad without the spaces; you'll use it later).

List of components:

Freenove ESP32 S3 (https://amzn.eu/d/037b6wUp)

Freenove Breakout Board (https://amzn.eu/d/0iHsu2Aa)

Modul AD8232 kit (https://amzn.eu/d/07YVsl8V)

Waveshare Pantalla táctil 3.5" (https://amzn.eu/d/02yND250)

TP5400 1A Lithium Battery Charging Module 5V 1A Step Up Module Micro USB Interface (Aliexpress)

Pigtail usb c (Aliexpress)

Switch on/off (local store)

Battery Lion 18650 (local store)

1x2x3x 18650 Covered Battery Box Embedded (Aliexpress)

Resistor 30Kohm and 1kohm 1/4w (local store)

In the program (ecg_02062026.ino) you have to fillin the following fields:

“your SSDI”, “your SSDI password, “your email account”, “your email code

IMPORTANT: THIS IS A PROJECT OF ARDUINO IT IS NOT A REAL MEDICAL DEVICE

I DON’T PROVIDE SUPPORT

Tags