1 / 2
Adafruit PiTFT Plus 3.5 Desk Stand / Frame
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple, open-back desk stand for the Adafruit PiTFT 3.5 Plus with attached Raspberry Pi.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Simple, open-back desk stand for the Adafruit PiTFT 3.5 Plus with attached Raspberry Pi. This is used for my Claude-o-meter desk toy.
Assembly requires 4 M2.5 brass heat-set inserts and 4 M2.5x5 screws.
Print notes: the 3MF file is set up for printing on the frame's side with organic supports. If you print it face-flat, the lower fillet won't print right. Also I applied a slight texture to the front faces with fuzzy skin, which you can disable if you don't want it.