1 / 3
Qidi Q2 Foot Internal spacer for a snug fit — image 1
1 / 3

Qidi Q2 Foot Internal spacer for a snug fit

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This spacer helps the printer feet fit snugly and eliminates unwanted wobble.

Rating
0 / 5
Likes
3
Downloads
29
Makes
0
Views
179
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

After printing this foot model on my Qiqi Q2: (https://www.printables.com/model/1411842-qidi-q2-foot-support-with-extra-clearance), I noticed that the feet were much too loose and didn't stay firmly attached. Since I didn't feel like redesigning the whole thing, I made an internal spacer with tight tolerances. It fits inside the original model and makes the entire assembly fit the printer's feet much more securely.

If you've run into the same issue, this spacer should help fix it.

Try to print original feets. If you face the same issue - you can try out my solution.

You will need 4 parts. just insert it inside the feet-part and then attach to Qidi Q2 printer. 

The toleranses is tigh, so be sure that your printer passes the orca tolerance test.

No supports needed. Print flat side on the bed.

I printed mine in PETG

10% infill and 4 perimeters\top\bottoms is fine

Tags