1 / 8
Heavy-Duty Bookshelf Support / Wzmocniony Wspornik — image 1
1 / 8

Heavy-Duty Bookshelf Support / Wzmocniony Wspornik

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a robust, geometric corner bracket designed specifically to stabilize wall-mounted bookshelves carrying

Rating
0 / 5
Likes
37
Downloads
79
Makes
0
Views
377
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial — Share Alike

🇬🇧 English Version (Recommended for main description)

Heavy-Duty Bookshelf Support / Corner Bracket

This is a robust, geometric corner bracket designed specifically to stabilize wall-mounted bookshelves carrying heavy loads (like books or files). Its clean, wedged design distributes weight evenly, ensuring your shelf stays perfectly stable and safe.

The model features a smart, asymmetric mounting system: a long, reinforced plane with two mounting points for maximum grip against the wall, and a perpendicular face with a single hole to lock the wooden shelf board in place.

Print Settings (Recommended for high strength):

  • Material: PETG, ASA, or High-Quality PLA (PETG preferred for mechanical durability)

  • Perimeters (Walls): 4 - 5 (Crucial for structural integrity)

  • Infill: 35% - 50% (Gyroid or Grid pattern for maximum compression resistance)

  • Top/Bottom Layers: 4 or 5

  • Supports: Not needed (print it flat on its side for maximum layer strength across the stress lines)

Assembly Instructions:

  1. Place the bracket with the 2-hole side flat against the wall, directly underneath your shelf board.

  2. Mark, drill, and secure the bracket to the wall using heavy-duty wall plugs and screws.

  3. Screw a short wood screw through the single hole directly into the bottom of the wooden shelf board to prevent it from sliding or tilting.

🇵🇱 Wersja Polska

Wzmocniony Wspornik / Podpórka do Ciężkich Półek

Solidny, geometryczny wspornik zaprojektowany specjalnie do stabilizacji ściennych półek na książki. Dzięki klinowemu kształtowi (zastrzał), element idealnie przenosi obciążenia i zabezpiecza półkę przed uginaniem się oraz wyrwaniem.

Model posiada przemyślany układ otworów: długa płaszczyzna z dwoma otworami gwarantuje pewne mocowanie do ściany, a prostopadła ścianka z jednym otworem służy do zablokowania samej deski.

Rekomendowane parametry druku:

  • Materiał: PETG, ASA lub dobrej jakości PLA (PETG zalecany ze względu na wytrzymałość mechaniczną)

  • Liczba obrysów (Ścianki): 4 - 5 (Kluczowe dla udźwigu!)

  • Wypełnienie (Infill): 35% - 50% (Wzór Gyroid lub Grid)

  • Warstwy górne/dolne: 4 - 5

  • Podpory: Brak (najlepiej drukować leżąco na boku, co zapewnia najlepszy układ warstw względem działających sił)

Instrukcja montażu:

  1. Przyłóż wspornik stroną z dwoma otworami płasko do ściany, bezpośrednio pod deską półki.

  2. Zamontuj go do ściany za pomocą solidnych kołków rozporowych i wkrętów.

  3. Przez pojedynczy otwór wkręć od dołu krótki wkręt do drewna bezpośrednio w deskę, aby całkowicie ją zablokować.

Tags