Wera Kraftform Big Screwdriver Holders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for IKEA SKÅDIS boards, comprising of 3 sizes of WERA screwdriver holder using the 'T-Clip' locking system.
- Rating
- 4 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 1
- Views
- 80
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Three sizes of holder for the popular WERA Kraftform Big screwdrivers, designed to make the inserting and removal of each screwdriver quick and simple.
Each screwdriver holder can be individually printed to suit and is designed to match the WERA hex handle design allowing the screwdriver to be held securely without rotating so that the size and shape information can be positioned facing forward.
The three sizes fit common WERA screwdriver handles sizes, measured across the flats of the hex shaft:
Small - 20mm
Medium - 23mm
Large - 27mm
Installation is straight forward as the design uses a location tab for initial placement and then held securely or easily repositioned using the popular ‘T-Clip’ mounting system.
Optimum Print Settings:
Standard 0.4 mm nozzle and 0.2 mm layer height is fine.
Prints directly from the base surface.
No supports are needed.
Infill - 20% recommended but can be increased as required.
Variable layer height is a sensible option if you care about the cosmetics of the curved surfaces.