PRC-77 case for Baofeng UV-5R Vietnam War
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The most realistic PRC-77 case that can fit walkie-talkie. Design for Baofeng UV-5R and others. Best for NaM milsims.
- Rating
- 5 / 5
- Likes
- 116
- Downloads
- 355
- Makes
- 2
- Views
- 3,089
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
PRC-77/25 Baofeng case:
This is the best and the most realistic replica of PRC-77 on the internet. Model is 1:1 copy of the legendary radio from the Vietnam war era. Model is primary design for airsoft/milsim events but you can also used it as a reenactment prop.
Model is primary compatible with Baofeng walkie-talkie UV-5R but other types of the radios that are using the same antenna bese will fit just fine.
The 2.0 version is total redesign of the previous model to make this a true 1:1 copy of the PRC-77/25. Big thanks to Treebeard whos consulted this version with me.
Assembly:
The body of the radio is design to be put to gether by inner part that connects all body pieces to gether. Also you gonna need to fill the gap between those pieces with a filler putty to make the body look good. Big part of that gap will be coverd by the ribs.
Model is design for M3 and M4 screws in various lengths longest should be the 15mm but in most cases the length is universal. You are also gonna need two M6 screws at least 100mm long these are for the frquency screws/lugs. Most of the screws are screwed in to the plastic but some of them need a nut, so M4 and M6 nut is needed. Ideally get a two M6 wing nuts to meke the radio look realistic.
The fake locks on the lower part of the body are design to snap under crew heads that are screwed from the outside of the body and sticking out about 2mm.
Handles should be made out of 6mm metal rods or do not trust the plastic ones. Handle plug plugs the hole from the underside of the lower body.
Two part hand set conecter should be hold together by the rubber band in the top groove.
Walkie-talkie:
Baofeng radio is instaled by the rubberized antenna bese that fit in to the dummy PRC-77 antenna base and its secured by the other part of the antenna that screws from the top. Also instaled the gear for the turn ON/OFF function before instaling the radio. Hendset cable goes trough the port base and trough the hole in the upper part of the body.