Anycubic i3 Mega - Hotend cover with BLTouch mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the Hotend cover from sparky0815 with added BLTouch mount.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 83
- Makes
- 2
- Views
- 689
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
TL;DR: This is the Hotend cover from sparky0815 with added BLTouch mount.
Soon after getting started with Anycubic i3 Mega, I realized that the default part cooling fan was only effective when printing left-to-right, much less when the head travels right-to-left. I tried some different fan ducts and complete head assemblies, but they seem to actually worsen my prints.
Reading good reviews, I decided to try this: https://www.thingiverse.com/thing:2850837
But I had BLTouch mounted in the front of the nozzle, so I needed to move it away to make room for the duct. Not finding anything ready, I took sparky0815's head cover, which I like the clean design of, and added a small platform to mount the BLTouch on. It worked well, so I'm sharing it.
BLTouch offsets I measured are X=14 and Y=-45
Thanks again to sparky0815 for the nice cover and to H_Run for the very effective cooling duct.
Category: 3D Printer Parts