1 / 2
H4 Stock Bars for Excalibur
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable Stock bars for Excalibur by Sillybutts.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 5
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printable H4 bars for the stock bars on Excalibur. Did not include the superfluous hole from a standard H4 bar and they obviously aren't threaded. These work great on Excalibur since they're just under slight tension and they feel plenty rigid enough. Each bar just fits on the print bed of a Mk3s (250x210) diagonally.
I recommend printing them solid and strong. Just fits diagonally on my Mk3s+ but I have to disable the skirt. I used PETG. Make sure you clean the corners of your build plate well as there is no room for skirt or brim!