Frieren Running
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A model of Frieren holding the staff running.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 25
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Another model of Frieren in different style to my previous uploads.
Designed for both filament (FDM) and resin (SLA/DLP) printing.
The model is separated into 9 parts uploaded as STL files . The difference between 2 head versions is modeled vs. blank eyes.
Two 3MFs uploaded for reference (set up with PrusaSlicer):
"Frieren.3MF" shows support/brim/seam settings.
"Frieren-Original.3MF" contains each part in its original position for variety usage.
FDM Printing & Assembly Tips
Support materials are required in most parts.
Individual STLs are in recommended printing rotations.
Adjust seam position on the head part to prevent it from appearing on the face.
Lower layer height and higher infill density are recommended.
Requires glue to assemble.