Cap for Trellis Wood Battens 47x23mm – Protective Cap with Clamping Ridges
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protective cap for 47x23mm trellis battens. Internal clamping ridges ensure a tight fit and weather protection.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 6
- Makes
- 1
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
🇬🇧
This functional cap effectively protects the end grain of 47x23mm trellis wood battens from rain and moisture, drastically extending the material's lifespan. Optimized for garden and landscaping structures.
Technical Specifications & Dimensions:
· Compatibility: Optimized for trellis wood battens 47x23mm
· Outer dimensions: 52.4 x 27.4 mm
· Inner dimensions: 50 x 25 mm
· Total height: 21.4 mm
· Wall thickness: 2.4 mm (Highly stable and durable)
Clamping mechanism: Internal ridges with a 22 mm inner gap ensure a secure fit.
Print Settings for Outdoor Use:
· Material: PETG, ASA, or ABS (Due to high UV and weather resistance; PLA is not recommended for
permanent outdoor use).
· Perimeters (Wall lines): At least 3 to 4 walls to utilize the full stability of the 2.4 mm thickness
without unnecessary infill.
· Supports: None required. Place the model upside down (flat inner side on the print bed) before slicing.
I printed the caps with the following settings:
nozzle 0,4mm; layer height: 0,2mm; PETG (for higher temperature resistance) + Signal White (for better IR reflection) (I used Prusament Signal White).
I attached the end cap at the top with a dab of acrylic.
Do you like the model?
If you find the design helpful, I would be delighted if you could give it a like and post a photo of your finished print in the Makes! This will help me to develop more free models.
🇩🇪
Diese funktionale Abdeckkappe schützt die Stirnseiten der Rankgitter-Holzleisten effektiv vor Regen und Feuchtigkeit, um die Lebensdauer des Materials drastisch zu verlängern. Das Modell wurde speziell für Konstruktionen im Garten- und Landschaftsbau optimiert.
Technische Spezifikationen & Maße:
Kompatibilität: Optimiert für Rankgitter-Holzleisten 47x23mm
Außenabmaße: 52,4 x 27,4 mm
Innenmaße: 50 x 25 mm
Gesamthöhe: 21,4 mm
Wandstärke: 2,4 mm (Sehr stabil und langlebig)
Klemmmechanismus: Interne Klemmstege mit 22 mm Innenabstand sorgen für einen besseren Sitz.
Druckempfehlungen für den Außenbereich:
Material: PETG, ASA oder ABS (Wegen hoher UV- und Witterungsbeständigkeit; PLA wird für den dauerhaften Außeneinsatz nicht empfohlen).
Wandlinien (Perimeter): Mindestens 3 bis 4 Reihen, um die volle Stabilität der 2,4 mm Wandstärke ohne unnötiges Infill zu nutzen.
Stützstrukturen: Nicht erforderlich (No Supports), da die Innenseite flach auf dem Druckbett aufliegen kann (Modell vor dem Slicen auf den Kopf stellen).
Ich habe die Kappen mit folgenden Einstellungen gedruckt:
nozzle 0,4mm; layer height: 0,2mm; PETG (für bessere Wärmebeständigkeit) + Signal White (für bessere Wärmereflexion) (Ich habe Prusament Signal White verwendet).
Ich habe die Endkappen oben mit einem Klecks Acryl befestigt.
Gefällt Ihnen das Modell?
Wenn Ihnen das Design hilft, freue ich mich riesig über einen Like und ein Foto Ihres fertigen Drucks in den Makes! Das hilft mir, weitere kostenlose Modelle zu entwickeln.

⚖ Community & Sharing Notice
This model was created exclusively for the Prusa community and is officially published on Printables.com.
You are welcome to use, modify, and create remixes of this design according to the license terms. If you share a modified version, please keep proper attribution to the original creator.
Please do not re-upload the original files to other platforms. If you want to share this model with others, please share the original Printables.com link instead.
Thank you for supporting the maker community and helping practical designs reach more users.
⚖ Hinweis zur Nutzung & Weitergabe
Dieses Modell wurde exklusiv für die Prusa-Community entwickelt und offiziell auf Printables.com veröffentlicht.
Du darfst dieses Design entsprechend den Lizenzbedingungen nutzen, verändern und eigene Remixe erstellen. Bei Weitergabe oder Veröffentlichung von abgeleiteten Versionen bitte den ursprünglichen Ersteller nennen.
Bitte lade die Originaldateien nicht auf anderen Plattformen erneut hoch. Wenn du dieses Modell mit anderen teilen möchtest, verwende bitte den originalen Printables.com-Link.
Vielen Dank für die Unterstützung der Maker-Community und dafür, dass praktische Lösungen weitere Nutzer erreichen.