FSN-Adapter for Bosch Professional GKS 18V-57-2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple adapter for the GKS 18V-57-2 to fit on the FSN guide rail from Bosch
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 43
- Makes
- 0
- Views
- 424
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I made a adapter for the GKS 18V-57-2 circular saw from Bosch Professional to use it with the FSN guide rail. There are two files for the main part of the adapter: one file (the one with the rectangular shape) is only for large printers, the other file fits on a printbed with the size 250mm x 210mm.
To attach the adapter on the circular saw, you only have to tighten 3 screws. For easy handling, the screws don't have to be totally screwed out. The two screws on top (M4 x 16) can be loosen, then you can slide the clamping bars back and when you loose the screw from the bottom (M4 x 8), the clamping bracket turns 1/4 turn so you can remove the saw.
Print all parts with 0.2mm layer hight, the adapter with 30% infill, the small parts "clamping bracket" and "clamping bar" with 100% infill. The part "clamping bracket" needs support, the other two don't.
You need additional:
2x countersunk screw M4 x 16
1x countersunk screw M4 x 8
2x hex nut M4
1x square nut M4