1 / 6
FSN-Adapter for Bosch Professional GKS 18V-57-2 — zdjęcie 1
1 / 6

FSN-Adapter for Bosch Professional GKS 18V-57-2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple adapter for the GKS 18V-57-2 to fit on the FSN guide rail from Bosch

Ocena
0 / 5
Polubienia
5
Pobrania
42
Wydruki
0
Wyświetlenia
418
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

I made a adapter for the GKS 18V-57-2 circular saw from Bosch Professional to use it with the FSN guide rail. There are two files for the main part of the adapter: one file (the one with the rectangular shape) is only for large printers, the other file fits on a printbed with the size 250mm x 210mm.

To attach the adapter on the circular saw, you only have to tighten 3 screws. For easy handling, the screws don't have to be totally screwed out. The two screws on top (M4 x 16) can be loosen, then you can slide the clamping bars back and when you loose the screw from the bottom (M4 x 8), the clamping bracket turns 1/4 turn so you can remove the saw. 

Print all parts with 0.2mm layer hight, the adapter with 30% infill, the small parts "clamping bracket" and "clamping bar" with 100% infill. The part "clamping bracket" needs support, the other two don't.

You need additional:

2x countersunk screw M4 x 16

1x countersunk screw M4 x 8

2x hex nut M4

1x square nut M4

Tagi