Buddy Box Steel Ventilated Cover for Prusa XL - Printable Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spare 3D printable parts for the Buddy Box Steel Ventilated Cover created by Bartallama3D
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
These are the printable spare and replacement parts for the Bartallama3D Steel Buddy Box Ventilated Covers for the Prusa XL — both the Steel Ventilated Cover with GDSTime 24V Fan and the Noctua NF-A6x25 Compatible version. If you own one of these kits and need to replace a printed component — or want a spare on hand — you can print any of them here.
The covers are drop-in steel replacements for the stock Prusa XL Buddy Box cover, with purpose-cut ventilation and a fan to keep the electronics bay cool during long prints and in warm environments.
The Parts
Noctua NF-A6x25 Fan Cover — Sits over the Noctua fan to protect the fan blades. Requires 4× M3×4×5 heatset inserts melted into the part.
60×60×15 Fan Cover — Sits over a 60×60×15 mm fan to protect the fan blades. Requires 4× M3×4×5 heatset inserts melted into the part.
Cable Cover — Covers the opening where toolheads 3–5 plug in, for anyone running a 1- or 2-toolhead Prusa XL. Requires 2× M3×4×5 heatset inserts melted into the part.
Voltage Regulator Board Mount — Holds the 24V → 12V step-down converter board. Requires 4× M3×4×5 heatset inserts and should be printed with ESD PETG.
Recommended Print Settings
All four parts print well in PETG at a 0.2 mm layer height. For the two fan covers, turning on fuzzy skin on the outer surface gives a clean textured finish that hides layer lines. Print the Voltage Regulator Board Mount in ESD PETG.
Part | Material | Layer Height | Notes |
|---|---|---|---|
Noctua NF-A6x25 Fan Cover | PETG | 0.2 mm | Fuzzy skin on outer surface · 4× M3×4×5 heatset inserts |
60×60×15 Fan Cover | PETG | 0.2 mm | Fuzzy skin on outer surface · 4× M3×4×5 heatset inserts |
Cable Cover | PETG | 0.2 mm | 2× M3×4×5 heatset inserts |
Voltage Regulator Board Mount | ESD PETG | 0.2 mm | 4× M3×4×5 heatset inserts |