1 / 3
Buddy Box Steel Ventilated Cover for Prusa XL - Printable Parts — zdjęcie 1
1 / 3

Buddy Box Steel Ventilated Cover for Prusa XL - Printable Parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spare 3D printable parts for the Buddy Box Steel Ventilated Cover created by Bartallama3D

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
67
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

These are the printable spare and replacement parts for the Bartallama3D Steel Buddy Box Ventilated Covers for the Prusa XL — both the Steel Ventilated Cover with GDSTime 24V Fan and the Noctua NF-A6x25 Compatible version. If you own one of these kits and need to replace a printed component — or want a spare on hand — you can print any of them here.

The covers are drop-in steel replacements for the stock Prusa XL Buddy Box cover, with purpose-cut ventilation and a fan to keep the electronics bay cool during long prints and in warm environments.

The Parts

Noctua NF-A6x25 Fan Cover — Sits over the Noctua fan to protect the fan blades. Requires 4× M3×4×5 heatset inserts melted into the part.

60×60×15 Fan Cover — Sits over a 60×60×15 mm fan to protect the fan blades. Requires 4× M3×4×5 heatset inserts melted into the part.

Cable Cover — Covers the opening where toolheads 3–5 plug in, for anyone running a 1- or 2-toolhead Prusa XL. Requires 2× M3×4×5 heatset inserts melted into the part.

Voltage Regulator Board Mount — Holds the 24V → 12V step-down converter board. Requires 4× M3×4×5 heatset inserts and should be printed with ESD PETG. 

Recommended Print Settings

All four parts print well in PETG at a 0.2 mm layer height. For the two fan covers, turning on fuzzy skin on the outer surface gives a clean textured finish that hides layer lines. Print the Voltage Regulator Board Mount in ESD PETG. 

Part

Material

Layer Height

Notes

Noctua NF-A6x25 Fan Cover

PETG

0.2 mm

Fuzzy skin on outer surface · 4× M3×4×5 heatset inserts

60×60×15 Fan Cover

PETG

0.2 mm

Fuzzy skin on outer surface · 4× M3×4×5 heatset inserts

Cable Cover

PETG

0.2 mm

2× M3×4×5 heatset inserts

Voltage Regulator Board Mount

ESD PETG

0.2 mm

4× M3×4×5 heatset inserts

Tagi