Decorative Rack Blank
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a decorative rack blank for 19" server racks.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 59
- Makes
- 1
- Views
- 860
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is a decorative rack blank for 19" server racks. In its current form it requires an MMU for the gold and a resin printer for the gems. The gems of course can be printed in FDM formats. Print face down with supports for the ledge for the center part. Connect the sides with the connector, glue in the center piece and then enjoy!
There are 2 blanks in the files, 1 with the holes open for air flow and 1 with the holes closed for hot/cold aisle airflow. If you print the one with the holes sealed make sure you have enough top layers so the printer easily bridges over the holes.