Spinning battle tops - 100% printable - no support - collection - video
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Battle-ready: Modular tops with mix-and-match parts. Easily replace individual damaged blades in seconds.
- Rating
- 4 / 5
- Likes
- 46
- Downloads
- 164
- Makes
- 3
- Views
- 914
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Spinning battle tops - 100% printable - no support - collection - video
Battle-ready: Modular tops with mix-and-match parts. Easily replace individual damaged blades in seconds.
The drive, cone, and tip remain identical across the board, making all discs universally compatible. Choose from 4, 6, or 8 blades for any battle top—or mix and match them to create your own custom setup.
The higher the infill, the longer it spins and the better it performs in battle.
Hand-tighten the drive until you hear 2 to 3 clicks.
I recommend using PETG.
All .stl files are in the right orientation for printing.
Use the included STEP file to customize the disk and blades with your own design.
Dimensions:
Diameter 90 mm
Height 76 mm
Settings blades & tip:
2 perimeter
0,2 layer hight
100% infill
no support
Settings cone, cords & drive:
3 perimeter
0,2 layer hight
15 % infill
no support
Settings disks & handles:
2 perimeter
0,2 layer hight
15 % infill
no support