Lady Justice Remix for Easy FDM printing V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of jimjimjimmyjim's "old lady justice - statue - gubbins" from Thingiverse
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 101
- Makes
- 1
- Views
- 429
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution
At the request of another Printables member, I added slip on interfaces for both the sword blade and scale handle to simplify the gluing process for this model.
I'd briefly considered making those changes years ago when I posted my first remix of jimjimjimmyjim's "old lady justice" design, but decided not to as such changes would introduce difficulties to anyone who prints her at a smaller scale. Those interfaces are tiny at the base scale of this model, so reducing her size will either tighten up the .2mm undercut I used with them, cause the interfaces to be super weak, or make them disappear all-together.
I maintained the original scaling I used with my first remix of jimjimjimmyjim's design but moved the round base forward on the statue that includes the round base for better weight distribution, and also replaced the scale bowls with those I used with my second remix of jimjimjimmyjim's model which have improved aesthetics and simply hang on the scale rather than needing to be glued in place.
For me, these parts print best as they're oriented in the STL files. The main body of the statue will DEFINITELY need supports, and I print it using organic (tree) supports to buildplate only. For the scale hanger, I use "normal" supports to buildplate only. I print the weight bowls as oriented in the STL with no supports or other considerations. For the sword blade, I don't use supports, however, I do add a brim to it for better bed adhesion since it has such a small footprint on the bed and could topple over easily. I print the pedestal base as is with no considerations. Lastly, the blank name plate is for adorning the model with whatever name, saying, description, or other information the maker desires. Add whatever text to it you like, then print it with no special considerations. I'm fond of running a wide tipped sharpie over the raised text before gluing the plate to the pedestal, but you may have better results with a pause and filament swap, or using a MMU or the like for swapping colors for the text.
If you've already looked at the first remix I did of this model, you'll notice I printed it in silk copper. While I was quite pleased with the end result, when I revisited that model to make trophies for my son's work, my silk PLA prints did nothing but cause me a massive amount of grief. The model looks spectacular in the metallic silk filaments, however, silk PLA has the worst layer bonding of any filament out there. The additives of silk PLA that erase layer lines and give models that amazing sheen also make models fragile. While trying to assemble those models with my big meaty claws, I kept breaking parts. My solution, which I'm unlikely to walk back anytime in the foreseeable future was to print the model in plain old PLA of any color, glue it together then paint it with a shaker can. I'm just throwing that out there for others who's hands aren't particularly stable. The gray model you see in the photo's is plain old Amazon Basic's dark gray PLA.
ASSEMBLY: I recommend test fitting both the scale hanger and sword blade to the statue BEFORE applying any glue. Even though those two interfaces have .2mm's of wiggle room, most FDM printers aren't dialed in well enough to produce such sharp corners on tiny structures. That said, you may find it necessary to perform some light sanding or filing on either the elongated hex key where the sword blade attaches, the square key on the scale handle that fits into the bottom side of her left hand, or perhaps even both.
Once the sword blade and scale handle fit the model nicely, apply a dab of super glue to each the sword blade hole and scale handle square tip, and press them into place. The main reason for gluing those two pieces before attaching the assembled model to the pedestal, if you're so inclined to use the pedestal, is so the scale hanger will act as a guide for ensuring the scale will hang parallel to the face of the pedestal while attaching the pedestal to the base model. Otherwise, it will look trashy IMO. If you are using the pedestal, note that the round base of the statue is 70mm's wide, same as the pedestal, so you'll want to glue the base model to the pedestal all the way to the rear, keeping in mind that you'll want the scale hanger parallel to the flat front of the pedestal. The last part to be glued will be the placard to the front face of the pedestal. With this iteration, the scale bowls are intended to simply hang on the outer hooks of the scale, held in place by gravity alone. Since the two scale bowls aren't permanently attached to the base model, I would also recommend removing them whenever the model is moved to a different venue.