Counting matching models…
>> UPDATED VERSION OF THE SLOTH AVAILABLE HERE << The Flexi sloth with hooked claws - hang it from a plant or a string! Or just let it sloth around, your choice. It's adorable both ways. The claws can be snapped into place. The face has…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Meet the Mini Claw Machine , a tiny 3D printed claw toy designed to be built in just two pieces: the main structure with the claws and internal spring, plus the rod that connects everything and makes it work. Once assembled, simply push…
Print approx. €1.61–€1.96 excl. taxPreliminary estimate for one variant
Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Here is a modular hair claw clip with 3 different claw. The system is very simply. Improvement: With V3, you don't need support on the clamp, and you still need it on the clip.(in prusaslicer you should set the overhang threshold to 35…
Print approx. €4.49–€5.48 excl. taxPreliminary estimate for one variant
For the little ones... Hehehe, it's really for me! An Open Source Project - Fusion360 File Available! Print instructions Just Print Snap and Play Use the extra arm g-code file to make it longer
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
This is Minifigure of "Tomislaw Apoloniusz Curus Bachleda Farrell". A famous Kurvinox character from legendary "Kapitan Bomba" show made by Bartosz Walaszek. You have two ways of printing it: You can print it as parts and glue them…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
This model is used to hold a 330 ml can on bicycle bottle cages.
Print approx. €2.73–€3.34 excl. taxPreliminary estimate for PETGSource material: PET
2-colour Monster claw keychain.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
3D MODEL DESCRIPTION My father needed a blade balancer for his lawnmower blade this summer, so I designed him one. How it works: If the blade is unbalanced, one of the edges will weigh further down than the other. Then you have to remove…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
I used the Golf Ball Marker Template from Thingiverse (https://www.thingiverse.com/thing:3830902/files) an added the RPT pattern from the Original Callaway to it. For best fitting i had to scale to 101% maybe for your Printer you have to…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
This is a mashup of a Snail and Alien Xenomorph we sculpted as I wanted one for my front porch. Use gyroid infill at 5%, drill a 1" hole in the bottom, and fill it with plaster to give it weight so the wind won't take it away. It's a easy…
Print approx. €20.74–€25.35 excl. taxPreliminary estimate for one variant
My 6 year old wanted these for qite some time and there was not any nice model so i made him (pretty) safe pair that should not break easily. Should be printed with supports under claws, placed on the flat part. No post processing needed.…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET
This model is used to hold a 500 ml can on bicycle bottle cages.
Print approx. €3.53–€4.32 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a way to hang up the bag for my ego mower when I wasn't using it. I didn't find anything online/would work with the pegboard I had, so I came up with this. The top is angled out because I don't have much space above where I…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for one variant
VITULUS is mostly printed mobile robot based on ROS. Visit https://lacina.dev or https://discord.gg/YqeNV5hEVN for more. You can see assembly of currently published parts in zipped .step file. Parts Wheel…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
Introduction Do you have a woman in your life? Does she have hair? Or maybe you are your self are a person with hair. Then do we have the thing for you! Here we have an outstandingly modelled claw clip that holds hair all day long! And…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
How to print: Quick summary: Material: PLA (I recommend not using silk filament) Print using vase mode or spiralize 0.5mm line width 0.3mm layer height 0 bottom layers 0s minimum layer time Print all parts seperately Choose the right…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
Tip scale the claw according to the size of your finger.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
A simple yet elegant and fast print Ravenclaw coaster for your hot or cold beverages.
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
The model is a clamping set for fastening workpieces for further processing on different surfaces. A set of clamps consists of three parts: 1. a block 2. one clamp 3. one screw To clamp the workpiece, the block must be placed on a flat…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Mine is created from Nylon, but any other material should work too. Dimensions: 110x70mm Happy mowing!
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Elk Skull Claw Beast
Print approx. €6.48–€7.92 excl. taxPreliminary estimate for PETGSource material: PET
More or less 1:1 model of claws for Fifish robotic arm. .OBJ file is here as well so we can modify them to get even more useful tools to use. After printing I recommend drilling the 4mm holes with a 4mm drill just to keep it a tight fit.…
Print approx. €4.43–€5.42 excl. taxPreliminary estimate for PETGSource material: PET
Mother NLAW is one of the ordained liberators to the Ukrainian people. As with Saint Javelin, her mission is to free Ukrainian lands of armor brought by the invaders. The included .gcode was used to achieve the print result as shown.…
Print approx. €13.99–€17.09 excl. taxPreliminary estimate for one variant
Also Check out https://www.printables.com/model/1043084-gobilda-ftc-battery-mount-no-numbername For all Tetrix style batteries Print with supports and scale to 100.1 % With its lightweight construction and optimized grip strength, this…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
Fixed and sculpted some details that got washed out during clean up. "Motherless by George Lawson" (https://skfb.ly/oJ7PE) by Vision Fountain is licensed under CC Attribution-NonCommercial-ShareAlike…
Print approx. €18.43–€22.53 excl. taxPreliminary estimate for one variant
realistic fossil replica
Print approx. €2.15–€2.62 excl. taxPreliminary estimate for one variant
I created my Velociraptor Claws Scratcher for everyone, who like Dinosaurs and need stylish Scratcher :-) I tried to design my new model like funny and useful tool, to can scratch on too far places, like back. I took a one original model…
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET
This a claw for a Duplo Backhoe used in models such as 3272, 3295, and 3295. It is not an exact reproduction, as I am missing the claw in question; thus this model. However it fits well and can scoop a 2 by 2 block. It can be printed in…
Print approx. €2.46–€3.00 excl. taxPreliminary estimate for one variant
CZ (EN version follows): Na školním RoboKroužku si naše děti hrají s Elecfreaks Ring:Bit Car . Pro naše hrátky by se občas hodil “chňapák”. Chtělo to něco s minimem součástek, snadno tisknutelné, co by děti dokázaly bez potíží sestavit.…
Print approx. €0.54–€0.67 excl. taxPreliminary estimate for one variant
I took @orangepiweb's model, added connection between the 4 claws, enlarged it by 25% and added holes for 4 magnets. The idea and that you can make red or black streaks and white claws and then connect it to a magnetic surface. its about…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Briggs and Stratton lawn mower not starting? Try this replacement ratchet pawl to get your mower started quickly. Print with supports on the bottom and make sure that the hole is opening up.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
I designed on Fusion 360 a replacement wing nut for my Craftman lawnmower. You just need a standard nut that you can insert in. You can glue it if you want. I have used black Materio3D PLA material.
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
I had this project cooking for several months now, mainly because I had to take a break and actually play the game but today I decide it's time to showcase the end result of my 3D-printed Hackclaw figurine based on the original model. The…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Hello, I have for you a Scorpion, a scorpion with claws . They are really true to their real sting. A little scary, but still suitable as a decoration, or for coloring. The scorpions are fully authentic, very detailed. Good luck with the…
Print approx. €7.58–€9.27 excl. taxPreliminary estimate for one variant
USE AT YOUR OWN RISK These are fins that are designed to fit a 4' fiberglass garden stake so you can recreate a large version of lawn darts or lawn javelins for a backyard game. The fins in the picture were printed on a Creality Ender 3…
Print approx. €12.35–€15.09 excl. taxPreliminary estimate for PETGSource material: PET
A simple slide to lock in connector for mounting VIFLY strobes to any drone including DJI <250g models. Use double sided tape to connect the light top to a flat section on the strobe (battery side etc) and the light bottom to a flat…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
I modeled the claw in Zbrush and printed with Prusa MK3S and Prusa white PETG @ .2mm layer height. There is three models available with a slot sized for use in the UK with a ten pence coin and one for the US quarter and one for a one Euro…
Print approx. €4.65–€5.69 excl. taxPreliminary estimate for PETGSource material: PET
A printable replacement part for your lawn mower with a pull-start cord. Unfortunately, the original broke, so I designed this replacement part. Printed with PLA, it works great. However, PETG is recommended for its UV resistance. Have…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
Replacement wheel for lawn mower deck Outside Diameter = 98.8mm Inside Hole Diameter = 12.2mm Wheel Width (ground contact width) = 50mm 282 Grams Designed to fit " Craftsman ZTS 7500 " 50-inch Deck
Print approx. €63.91–€78.11 excl. taxPreliminary estimate for one variant
This trailer is hitchable to toy tractors of unknown scale, please see photos for reference. Instructions (my way of building): there is no need of glue or screws - connections are made with mild overlap wheels and clamps are made for dia…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Schild Vorsicht Dachlawinen. Mit und ohne Löcher.
Print approx. €4.93–€6.02 excl. taxPreliminary estimate for PETGSource material: PET
The historical center of the city of Wroclaw in Poland, with its buildings, the university and its market square, one of the largest in Europe, represented in this model of the historical center. File in general STL and in Gcode for prusa…
Print approx. €4.90–€5.99 excl. taxPreliminary estimate for one variant
Pets or annoying loved ones need scratching so often it makes your hands tired? Do it the Ninja way, and put a set of claws on your hands instead. Saves those tired forearm muscles! Have a little Ninja-in-training who keeps tearing up…
Print approx. €2.77–€3.38 excl. taxPreliminary estimate for PETGSource material: PET
LEGO compatible Granade Launcher Based on M72 LAW designed to fit in a minifigure hand. I printed it in Zortax Z-ABS 2 because PLA is tend to stringing, but I reccomend to scale up it by 1% or 2% because ABS has a tendency to warp. I…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
https://twitter.com/trevwall/status/1143695664259325954 Then this: https://vinepair.com/booze-news/trevor-wallace-white-claw-truly/ It's like a Pierre that does squats. Print instructions one stl file. use Prusa slicer to modify layers…
Print approx. €5.05–€6.18 excl. taxPreliminary estimate for one variant
This is spare butterfly nut for all Gardena 380 Cylinder Lawnmower models. Original part is made of POM (Polyoxymethylene), but I made mine of PETG (threaded) and ABS (nut insert). Print instructions Category: Outdoor & Garden Summary…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
Santa Claws Godzilla Cookie Stamper
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
The original pins seem to get deformed quite fast (and get loose) as you can see in the first picture so I made a replacement. Printed with PETG they which will hopefully last longer. Original Einhell part number is 341313101058 Printed…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €4.61–€5.64 excl. taxPreliminary estimate for one variant
Ported from HL2 zombie torso model, cut the model from its claws and there it is. All supports, size, parts etc. are up to user to tweak and change.
Print approx. €6.28–€7.68 excl. taxPreliminary estimate for one variant
[EN] Spare fuel tank cap for AL-KO Highline 46.8 SPI - Brigss&Stratton 575iS engine. Print Material: PETG Number of perimeters: 4 Supports: No Additional material Rubber o-ring. Inner diameter approx. 30mm. I used the ring from the…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
My kid's constantly losing/forgetting to charge her ipad. I thought making the charging spot dragon-themed might help solve this issue. That kid loves dragons. I've seen a lot of floating shelves that look like hands and thought surely…
Print approx. €9.04–€11.05 excl. taxPreliminary estimate for one variant
22370 Honeycomb FTC Centerstage Claw. Instead of stacking pixels vertically, they are held horizontally.
Print approx. €5.26–€6.43 excl. taxPreliminary estimate for one variant
I recommend organic supports for this model and I printed it in 25% infill for additional strength. It should be simple enough to print on any printer, but I used my MK4.
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
Replacement part (P50 SPREADER CLAW (P750)) for a Cartoni Smart Lock mid-level tripod spreader (S731/SL). Intended for when one of the “claw” bits on the original breaks, and you only need the main part replaced. ADDITIONAL PARTS NEEDED :…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for PETGSource material: PET
With time the wheels of my Craftman lawn mower came loose and got out even if the bolt is in place. The wheel hole now has a conical shape and the back of the wheel is worn too. With those 2 parts no need to change the wheel. The flange…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
A remix of Sascha4532's excellent r600 wheel, split into two parts to allow for re-printing of the tyre as and when it wears out. The main wheel body can be printed in PETG or PLA, and the tyre was printed in TPU. You can use m5 bolts to…
Print approx. €12.89–€15.75 excl. taxPreliminary estimate for PETGSource material: PET
This set is (2x9 - 2x4 + 2x5) will hold (1x) 12" Stanley Wonderbar and (1x) ESTWING Pro Claw Nail Puller - 9" Each half holds 1 tool, so a person could mix and match with other tools. made from my flat bins here . The geometry for the…
Print approx. €7.93–€9.70 excl. taxPreliminary estimate for one variant
I always see dandelions while I'm mowing… but apparently not before or after. Carrying around a hand weeder tool in your pocket can be borderline lethal, so instead I built this clip that allows you to attach a hand weeder to the…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Source handle : https://www.thingiverse.com/thing:4643658 You can customise the sizes and lengths from the claws. Supports needed
Print approx. €6.69–€8.18 excl. taxPreliminary estimate for PETGSource material: PET
Výplň 100%, na výšku, podpěry všude. Materiál PETG. Pasuje na trubku průměru 22,2 mm, upevňovací otvor průměr 6 mm.
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
Remove the broken wheel entirely. Lube axle before installing new wheel. Easy to print. Easy to install.
Print approx. €17.45–€21.33 excl. taxPreliminary estimate for PETGSource material: PET
EN: Since the relatively delicate cable clip on my electric lawn mower often broke, I scanned one that had been glued together using a normal flatbed scanner and made myself a wider, more stable version. Since I wanted to spend as little…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Very easy to print: Better to print it in PETG and as shown on the first picture to increase robustness. The original one (broken!) is on the second picture.
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Improved design. After all, a stand without claws is not a stand. :)
Print approx. €0.72–€0.87 excl. taxPreliminary estimate for one variant
This is based on the Golden Claw from The Elder Scrolls V: Skyrim, but the Lego piece for the bead contest. PLA 0.2mm all layers Temp- 220° Bed Temp- 60° Top/Bottom shells(the only option I used for the whole print)- Rectilinear Sparse…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
So, it's a remix of the ever popular collapsible light saber. For gardening use, and perhaps also for water fights this summer, if you have more than one hose bib, etc. The collapsible blade has been removed. it prints fine with minimal…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Gedruckt in PETG 100% printed in PETG 100%
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Drawing and F3D file available in case your tool has different sized tines. These are designed for this Manual Core Aerator Lawn Tool which is no longer available online. Print wedge side down at 100% infill with PETG or similar durable…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
Replacement hub cap compatible with Scotts Classic 20 in. Manual Lawn Mower # 2000-20S. I can confirm it fits that model and I'll bet it fits a variety of the Scotts manual lawn mowers with 10 inch wheels (eg 415-16SG and 815-18S). “Neon…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign, reading “Lawn Chair Air: travel cheap” with art of a person being lofted by balloons tied to a chair. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in…
Print approx. €1.68–€2.06 excl. taxPreliminary estimate for one variant
22370 Honeycomb FTC Centerstage Claw with Bee Topper. Instead of stacking pixels vertically, they are held horizontally.
Print approx. €9.02–€11.02 excl. taxPreliminary estimate for one variant
FR La micro griffe est un ouvre colis de dépannage Rapide, facile, ultraléger, économique. Il n'est pas fait pour ouvrir des dizaines de colis à la suite, pour ça il est préférable de le faire en métal. Il est là pour vous dépanner quand…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Fallout Shelter : DeathClaw
Print approx. €4.96–€6.06 excl. taxPreliminary estimate for one variant
How long can you go... New Toy with options 3, 4, 5, 8 or 10 arms long. Print in Place so You Print & Play. Use a 3, 4 or 5 arm for a working toy. The 8 and 10 arms has too much friction wh printing with PLA TIP: Needs a tiny bit of…
I couldn't find a decent model of a Lawn chair on Printables. Thought I'd share on here! I used my Bambu Lab P1P with .2mm nozzle and .1mm layer lines. I cranked this baby to 100% infill because the model is so thin anyways. I also used…
I know other models exist, but nearly all of them have a lip on the top which goes over the knuckle. I'm more fond of the design where the claw just comes out between the knuckles, so I made this. Just plug the blades into the grip and…
Wolverine claws for cosplay or display. Only one claw file. Placement on hand determined by how far forward the claw is on the handle. Recommend testing fitting each claw one at a time starting with the middle claw. July 2024: Added more…
And now Dummy 13 is also a Weapon X.
What started out as a new version of the Blaster Arms ended up becoming a Power Claw, crazy how lack of focus and random prototyping works, aye? The claw takes a bit of extra force to get onto the arm immediately after printing; it…
At the provided scale, the inner diameter of the claw is 10mm. Scale it up to fit your use case. To make a thumb claw, I also scaled the model down in the Z direction so it would be stumpier. Normally I would provide a source file so you…
Classic lawn chair 1/12 scale as always. There are two ways of printing this model First to print the whole thing in one piece using supports Beware removing supports might be difficult, legs could break Second way is to print it in two…
Print Instructions Print the parts as listed down below. All STL files are in their respective print orientation! I used the default 0.20 mm QUALITY preset on an Original Prusa MINI+. Bucket Segment Activate 'brim' and consider decreasing…
The model is to be printed in 4 parts: 3 claws and the grip, and then assembled and glued. Consider the horizontal expansion setting in your printer to make the parts fit. Dimensions are 21 cm long and 6,5 cm wide. To legally sell PRINTED…
Little finger claws for funsies! Use with caution as it can be sharp. Not intended for children under 12. May cause injury. ---------------------------------------------------- V2 IS NOW INCLUDED AND FREE!!!!!…
This is a Version of cncmodels4you 's hogwarts house crests found on Thingiverse https://www.thingiverse.com/thing:4541930/files I painted them in Prusaslicer with a lot of detail.
Red Hood Outlaw Inspired Mask Enjoy Category: 3D Printing
Scaled the original part up a bunch to save a step, and added 3 holes to use for alignment. Print two copies, one mirrored. Remixed From: Alan Grant's Raptor Claw by SagaWorkshop Print instructions Cut three small pieces of filament,…
I made this claw model for a cat fursuit. The holes are meant to be used for sewing the claw to the glove. Adjust the size for each finger before 3d-printing. Print with a flexible material like TPU.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
We really dug into the Jurassic Park theme this 3D Printopia, formerly known as ERRF. CM Designs created an iconic prop, the raptor claw. The filament colors were included with the latest Protopasta Filament Subscription. Subscribe to…
I flattened the base of the claw for better adhesion, and re-oriented it to remove the need for supports. PS The symbols on the Gold claw are not correct. They are actually for the Emerald Claw. - thanks to TacoScientist for pointing that…
Sorry for the wrong files last time. Now it should fit a 235 x 235 mm build plate. I would recommend gluing the center rod in place to keep everything from spinning. It's made for cosplay only.
Here's the V7 of my wearable set of claws, that extend/retract with your fingers movement. The ZIP file contains a wide range of sizes and a few variants, allowing for a good fit (hopefully) for most users.
Introducing the the Clawstrider from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece for stability. All credit for character design goes to…
You need 6x “Link”, 6x “Shovel” and 2x “Spyder”. All parts screw together with M3 bolts and lock nuts. Don't tighten them to hard, the joints have to move freely. Attach a string to each Spyder parts. Thread the string from the lower…
I remixed the scaled remix to print this model whole, vertically. It turned out beautiful, so I wanted to share it. No assembly necessary! Due to the remix having pin holes, this model still had those internally but it doesn't affect…
![Skyrim Dragon Claw [improved printability]](https://media.printables.com/media/prints/192164/images/1786079_8aa72619-5f92-466c-9a64-627303046a56/abd3bfabd2f6f1685f666f3cd719b3eb_display_large_19.jpg)
