Liczymy pasujące modele…
How long can you go... New Toy with options 3, 4, 5, 8 or 10 arms long. Print in Place so You Print & Play. Use a 3, 4 or 5 arm for a working toy. The 8 and 10 arms has too much friction wh printing with PLA TIP: Needs a tiny bit of…
>> UPDATED VERSION OF THE SLOTH AVAILABLE HERE << The Flexi sloth with hooked claws - hang it from a plant or a string! Or just let it sloth around, your choice. It's adorable both ways. The claws can be snapped into place. The face has…
I couldn't find a decent model of a Lawn chair on Printables. Thought I'd share on here! I used my Bambu Lab P1P with .2mm nozzle and .1mm layer lines. I cranked this baby to 100% infill because the model is so thin anyways. I also used…
Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…
Meet the Mini Claw Machine , a tiny 3D printed claw toy designed to be built in just two pieces: the main structure with the claws and internal spring, plus the rod that connects everything and makes it work. Once assembled, simply push…
I know other models exist, but nearly all of them have a lip on the top which goes over the knuckle. I'm more fond of the design where the claw just comes out between the knuckles, so I made this. Just plug the blades into the grip and…
Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…
Wolverine claws for cosplay or display. Only one claw file. Placement on hand determined by how far forward the claw is on the handle. Recommend testing fitting each claw one at a time starting with the middle claw. July 2024: Added more…
And now Dummy 13 is also a Weapon X.
What started out as a new version of the Blaster Arms ended up becoming a Power Claw, crazy how lack of focus and random prototyping works, aye? The claw takes a bit of extra force to get onto the arm immediately after printing; it…
At the provided scale, the inner diameter of the claw is 10mm. Scale it up to fit your use case. To make a thumb claw, I also scaled the model down in the Z direction so it would be stumpier. Normally I would provide a source file so you…
Classic lawn chair 1/12 scale as always. There are two ways of printing this model First to print the whole thing in one piece using supports Beware removing supports might be difficult, legs could break Second way is to print it in two…
Print Instructions Print the parts as listed down below. All STL files are in their respective print orientation! I used the default 0.20 mm QUALITY preset on an Original Prusa MINI+. Bucket Segment Activate 'brim' and consider decreasing…
The model is to be printed in 4 parts: 3 claws and the grip, and then assembled and glued. Consider the horizontal expansion setting in your printer to make the parts fit. Dimensions are 21 cm long and 6,5 cm wide. To legally sell PRINTED…
Here is a modular hair claw clip with 3 different claw. The system is very simply. Improvement: With V3, you don't need support on the clamp, and you still need it on the clip.(in prusaslicer you should set the overhang threshold to 35…
Little finger claws for funsies! Use with caution as it can be sharp. Not intended for children under 12. May cause injury. ---------------------------------------------------- V2 IS NOW INCLUDED AND FREE!!!!!…
This is a Version of cncmodels4you 's hogwarts house crests found on Thingiverse https://www.thingiverse.com/thing:4541930/files I painted them in Prusaslicer with a lot of detail.
For the little ones... Hehehe, it's really for me! An Open Source Project - Fusion360 File Available! Print instructions Just Print Snap and Play Use the extra arm g-code file to make it longer
If you want to print something for your wife, mother, sister, someone with long hair that maybe needs it, or yourself. Well here you have it, a nice print in place hair claw clip, no need for springs, bolts or other materials, just print…
Red Hood Outlaw Inspired Mask Enjoy Category: 3D Printing
Scaled the original part up a bunch to save a step, and added 3 holes to use for alignment. Print two copies, one mirrored. Remixed From: Alan Grant's Raptor Claw by SagaWorkshop Print instructions Cut three small pieces of filament,…
This is Minifigure of "Tomislaw Apoloniusz Curus Bachleda Farrell". A famous Kurvinox character from legendary "Kapitan Bomba" show made by Bartosz Walaszek. You have two ways of printing it: You can print it as parts and glue them…
I made this claw model for a cat fursuit. The holes are meant to be used for sewing the claw to the glove. Adjust the size for each finger before 3d-printing. Print with a flexible material like TPU.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
We really dug into the Jurassic Park theme this 3D Printopia, formerly known as ERRF. CM Designs created an iconic prop, the raptor claw. The filament colors were included with the latest Protopasta Filament Subscription. Subscribe to…
I flattened the base of the claw for better adhesion, and re-oriented it to remove the need for supports. PS The symbols on the Gold claw are not correct. They are actually for the Emerald Claw. - thanks to TacoScientist for pointing that…
Sorry for the wrong files last time. Now it should fit a 235 x 235 mm build plate. I would recommend gluing the center rod in place to keep everything from spinning. It's made for cosplay only.
This model is used to hold a 330 ml can on bicycle bottle cages.
Here's the V7 of my wearable set of claws, that extend/retract with your fingers movement. The ZIP file contains a wide range of sizes and a few variants, allowing for a good fit (hopefully) for most users.
2-colour Monster claw keychain.
Replicated lawn dart fin for people who are trying to relive their childhood. Print instructions I did use 50% infill; Concentric Concentric Top/Bottom infill Size:102% Could Print with PETG or PLA PLA setting: 215 Hotend; 60 Bed temps;…
Introducing the the Clawstrider from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece for stability. All credit for character design goes to…
You need 6x “Link”, 6x “Shovel” and 2x “Spyder”. All parts screw together with M3 bolts and lock nuts. Don't tighten them to hard, the joints have to move freely. Attach a string to each Spyder parts. Thread the string from the lower…
I remixed the scaled remix to print this model whole, vertically. It turned out beautiful, so I wanted to share it. No assembly necessary! Due to the remix having pin holes, this model still had those internally but it doesn't affect…
Coworker needed replacement fins for his lawn darts. The ones I could find weren't ideal for his specific model so I created these. I believe his was one of the "Jart" brand models. Printed this in 95A TPU and it worked great (with fin…
3D MODEL DESCRIPTION My father needed a blade balancer for his lawnmower blade this summer, so I designed him one. How it works: If the blade is unbalanced, one of the edges will weigh further down than the other. Then you have to remove…
Update 18/11/2022 Thank you all for sharing, printing and enjoying this humble print. As I found that many removed the logo, I took it off and uploaded a bookmark. I also added a longest version, for those that need something over 10 cm…
I used the Golf Ball Marker Template from Thingiverse (https://www.thingiverse.com/thing:3830902/files) an added the RPT pattern from the Original Callaway to it. For best fitting i had to scale to 101% maybe for your Printer you have to…
A simple render of the Claude Code mascot, Clawd. If you print clawd.stl, you can change the color of the eyes with a simple filament change; otherwise clawd_singlecolor.stl has the eyes embossed.
Handy Cheat Sheet for calculating Volts, Amperes, Watts and Ohms using just two variables. Fusion360 design added for you to improve upon. Please share your feedback and comments :-)
This is a mashup of a Snail and Alien Xenomorph we sculpted as I wanted one for my front porch. Use gyroid infill at 5%, drill a 1" hole in the bottom, and fill it with plaster to give it weight so the wind won't take it away. It's a easy…
This is a model I designed to let people have a chance to make claws for a dummy 13
PRINT-IN-PLACE HAR CLAW CLIP This is the perfect gift for your mum this Mother's Day, it's not a remix, it's a complete redesign from my previous hair clip. It works better and the smaller version prints great. FOR THE LARGE MODEL YOU…
We bought a robot lawn mower back then, but after about a year of use, it started digging deep holes in the lawn. Due to our winding garden, there were many places where the robot had to turn on the spot. Due to the deep holes, he always…
Larry sells tickets to Starr Park visitors under the watchful eye of his twin, Lawrie. Larry loves rules, they make life easier! Lawrie doesn't love rules so much as enforcing them. They make a good team.
Just a random finger claw. Designed for: Inner diameter: 18mm finger lenght max.: 75mm Printed with 30% infill and brim. No support needed.
To build this - you will need one of each of these parts that are included (Choose one of the cylinders that is included) - along with a Bic Pencil spring (the ones that are hexagonal and look like this:) , and a toy screw or 4-40 x 3/8in…
This Black Ram Hand was designed to be BIG. It is entirely 3D printable including the bolts and nuts. Use it to grab and pick up huge items without skin/hand contact. 50% larger than the size of the Mark V, its can be attached to your…
a print friendly replacement to your pull start lawnmower. My dog chewed mine up so i had to replace it. I havent printed yet cause i havent printed in ABS or PETG yet. if you print let me know how it works and if anything should be…
I have designed this version inspired by swords and other retractable models. I have noticed that depending on the filament the performance may vary. For example with PLA+ from Sunlu I have better results than with CosPLA from Polymaker.…
Update : Version 1, printed in PETG, broke when it sagged and the Luba backed into it. Version 2 is easier to print since most pieces lie flat, but the number of parts went up to 8. It's also slightly larger than v1 so cover the Luba a…
Introducing the Fireclaw from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 100mm base. Use with the Fireclaw expansion during gameplay for the 4-legged stance. It is intended to be printed in…
Has a flat side to print standing up as pictured. Scale to desired size. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
I've included a low poly version that was ripped straight from the game files and a subdivided version.
My good old lawn mower (push-mower BRILL RazorCut Premium 38) didn't work any more properly, because one of the gear pinions (Sperrritzel) was a bit worn and the wheel didn't drive the spindel reliable any more - it stopped every now and…
You need only a good 3D printer and 8x 3mm screws.
This model is a lightly remixed version of the model I found from Natalia Mona Tj over on GrabCad. (https://grabcad.com/library/clawfoot-bathtub-claw-foot-bath-tub) I scaled it down and beefed up the legs for strength, trimmed some…
Recently I bought my mum gloves with claws for the care of flowers in the garden but the available size was too big. So i decide to use 3D printing, to solve this problem and now the claws allow for comfortable work. After dealing with…
This is a remix to address some issues I had with the original design. Printing info: PLA 0.4mm nozzle 0.20mm layer height 15% infill [UPDATE 6/22/2026] Per request, here are the diameters for the steps on the original model as posted.…
The original rubber came loose so we needed a replacement. It fits on the original tyre and can be screwed in place with the existing mounting holes. Printing: We used three walls and 20% infill with a layerheight of 0.3mm. For testing…
My 6 year old wanted these for qite some time and there was not any nice model so i made him (pretty) safe pair that should not break easily. Should be printed with supports under claws, placed on the flat part. No post processing needed.…
From the Smithsonian 3D Digitization library, I have converted the mesh to STL in Blender. Print with supports with the base of the claw near the build plate, point of the claw straight up. 1:1 Allosaurus fragilis Marsh, 1877: Claw…
Infernal Claw Mug – A demonic 3D printable coffee mug straight from the depths of Hell! This striking mug features a massive demonic claw aggressively gripping a clean cylindrical cup. The devil's hand emerges with sharp, twisted talons,…
A awsome pair of claws for Dummy 13.
Clamping Claw in two sizes with M6 thread for a CNC my recommendation: -> petg -> 250/70 degrees celsius
Finally, I can fix the biggest problem with the original claw! Some people said they had issues printing the original claw fully upright since the joint might snap off due to the print lines. Not anymore! I went back and refined the…
Why? I wanted to make a claw using this model and I learned it was made originally for a laser cutter. I have spent many hours perfecting this for a 3D printing. What is needed? You can either print the Claw.stl or print the following: 4…
Print it flat on the print bed whitout supports
A tool for eating while multitasking. Eat chips, fries, or anything else without getting any on your hands. Perfect for snacking while gaming without worrying about Dorito dust on your controller or keyboard.
The original injection molded handle for the MacAllistar MLMP1600 Lawnmower is far too flimsy and is prone to splitting near its pivot point. (See image of blue handle) It was impossible to find a spare online so I decided to model it…
Introducing the Frostclaw from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. Use with the Frozen Wilds expansion during gameplay for a cosmetic 2 legged stance. It is intended to be…
I'm using my design for FTC 2022 and it works great, + it's light.
I added the base that goes with the cone. I lost it years ago and had been using a nail to balance the cone. I forgot about the base when I made the first model. Printed with no supports in about 90 minutes.
I’ve been collecting funnel ideas for awhile. I’ve downloaded parametric models that you can customize however you like. I also downloaded several with interesting shapes. This was all because I needed a funnel with a long spout to reach…
This model is designed based on certain versions of the M72 LAW and has been modified specifically for 3D printing. As a result, there are differences in appearance and dimensions compared to the real one. The difficulty of assembling…
This is a golf tee caddy for up to ten golf tees. My golf tees have a diameter of 4.75mm and they are 7mm long. The Callaway logo is from Wikipedia https://en.wikipedia.org/wiki/File:Callaway_Golf_Company_logo.svg. Design The design was…
Paint base on black and nails on off white Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.16 Infill: 25% Filament: --- PLA White Notes: La pintura es la clave.…
Hi Ryan, Here are two very clean cut model cowl versions of the black panther, but hopefully the Neckless and Claw will be ideal for you and your sons project, Please double check the sizing, as I try to generally make it round medium to…
Advise to print with 100% fill to lower buoyancy and smallest possible layer height (mine goes to 0,08 mm). Chose water resistant materials like ASA or ABS. I may have overdone with supports here.
Can't get the raptors claw in game so I modeled my own! I positioned all the handle pieces in the intended orientation to minimize the need for supports. Only 2 of the handle pieces need supports but the areas where supports touch are…
These are drop in replacements for the top most red plates on the Dart Zone Outlaw. To remove your stock plates, undo the 3 screws, and then you will need to pull them out. There is a clip towards the back of the plates near the rear iron…
This remix adds picatinny rails to the Dart Zone Outlaw! It's longer than RedCowl's original model, to give the front of the blaster a chunkier feel. Like RedCowl's design, this is a drop-in that replaces the front rails and re-uses the…
To install, start by butterflying the shell. Remove the original frontend. Drop in the new frontend and then button up the shell. For printing, I like to print with the front on the build plate, with some supports for the larger…
Enhance your robot lawn mower’s terrain capabilities with this wheel. Designed to fit both the Stihl RMI 422 and 632 models, it allows you to use the original wheel cap for a seamless upgrade. See the below video for installation…
This model is used to hold a 500 ml can on bicycle bottle cages.
Would you like your Dart Zone Max Outlaw to be more accurate, and look awesome while doing it?? Look no further than this drop-in replacement part that uses the “Ex” BCAR design by Epicxxx. This is installed just like the rest of…
I loved the look of The Back Scratcher but found that those tiny points didn't offer as much scratching satisfaction as I wanted. So I replaced the focused tips with wide blades for maximum scratchage. And then, while I was at it, I threw…
This is the Pact Dragonclaw Circlet from the game Elder Scrolls Online. https://elderscrolls.fandom.com/wiki/Pact\_Dragonclaw\_Circlet To be printed and worn on your head, or to decorate a shelf. It's designed to be printed without…
halloween is coming! enjoy it with these claws
A better-looking version of my other box opener ( The Raptor Claw (Box Opener) by Voltz18 | Download free STL model | Printables.com ) Using a real velociraptor claw as a reference, I made this one look closer to how it should. In other…
My hardest to print cauldron! Brims + Supports recommended. Check out my whole cauldron collection! Happy Halloween! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld…
This is a drop in replacement for stock red faux-picatinny that is on the Dart Zone Max Outlaw. To install, remove the stock panels (save the screws) and press in the new panels you have chosen. Insert the screws into the screw ports. You…
just repaired the model
I have improved some of the popular Stealthburner Patterns with the following attributes: transferred them to the release version of the Stealthburner Main Body made the color patterns 1mm thick, so that also weaker colors can shine and…
Updated 2/25 with stronger fins! ADDED OPTIONAL PARTS: Extra large tip added for more weight! Round tip added for safety! The more weight to the nose the better: This thing flies so good I bet I could fling it 5 houses down. You can throw…
Print with the fins down on the bed, with supports for the inner rod. Use a brim as needed. I suggest sinking the ends of the fins down through the bottom of the slicer bed to make it flat on the bottom, then use a large brim. This will…
Printing Scaling: The inner diameter of the ring is 10mm. You'll need to scale it according to your finger size. For that i recomment mesuring the circumference of each finger tip and scaling the ring according to the following formula:…
This is a high gripping force clamp configuration (relative to other FDM versions) that was re-engineered to included the following features Triangular Cross-Section Threaded Drive Rod. This insures the drive rod is always centered in the…
![Skyrim Dragon Claw [improved printability]](https://media.printables.com/media/prints/192164/images/1786079_8aa72619-5f92-466c-9a64-627303046a56/abd3bfabd2f6f1685f666f3cd719b3eb_display_large_19.jpg)
