Zwift Ride Setback adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For all that have problems with the large setback of the Zwift Ride frame.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 336
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
You need one M8 and M6 screws for higher stability.
Printed in PETG with 4 outer walls and 5 top an bottom layers and 40% cubic infill.
Just mirrow the part in your slicer to have both sides. I printed it laying flat in order to have better stability in at the holes.
NOTE: When you tight the M8 screw there will be a crack, because of the press fit. I'm still searching for the right tolerance. But since I'm 180cm with 80kg and did also short 600W intervalls on the saddle without problems I want to share this part for all that have the setback problem on zwift ride.
UPDATE (18.06.2026): The crack appears between the layers because the tension at the screw is quite high. I recommend in such cases taking a longer M8 screw with a biq washer to clamp it from the very outside (see 2nd picture), so the part shouldn't crack between the layers. I also created Version 2 (_V2). It has little more material so I hope it's more stable.