Chop Saw Dual Dust Extraction Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dust extraction adapter for Einhell chop saws. Keeps your workshop clean. Best printed in PETG.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 60
- Makes
- 0
- Views
- 494
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Description
Efficient dust collection for Einhell mitre saws. This 3D-printed Y-adapter combines both standard extraction points of the saw (upper blade guard and lower chip collector) into a single outlet. Designed for a direct connection to a standard Drain pipe 90 mm or workshop dust extraction system.
Function: Optimally distributes suction across both high-dust zones of the saw.
Saw Connection: with a standart recycled vacuum hose cut to length
Extraction Connection: Directly compatible standart drain pipes 90 mm
Assembly: Simple push-fit. For maximum stability, securing the HT pipe with a hose clamp is recommended (as shown in the image).
Print Settings Recommendation:
Material: PETG or ASA (for workshop durability and impact resistance).
Infill: At least 20–30% (Gyroid recommended for structural strength).
Walls: 3 wall loops to ensure airtightness and strength at the pipe couplings.
Supports: Depending on print orientation (best printed standing on the large single opening), minimal supports may be needed inside the Y-split or at the overhangs of the smaller tubes - depending on your printer
👍 Support my work: If you download and use this adapter, don't forget to hit Like and post a photo of your print. Feedback is always welcome!