Mesh-Link 30 (RAK 19007 1W) Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for RAK 19007 Meshtastic/Meshcore node with 1 Watt Module
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 239
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Meet Mesh-Link 30 and 30S, a Meshtastic/Meshcore solar or battery/USB powered long range node, with support for a 107mm x 61mm solar panel, an 18650 battery holder and a RAK 19007 wisblock board with a RAK 13302 Lora Boost module. This node is intended for outdoor or indoor use with an included zip tie pole mount but for custom solutions, the DXF for the mounting bolt holes is also included.
BOM:
1x 18650 Battery
1x 18650 Battery Holder
1x PH2.0 Battery Connector (or pre built pigtail)
1x JST ZHR 2 Solar Connector (optional)
1x SMA to iPEX pigtail/adapter
1x SMA 915MHZ Antenna
1x RAK 19007 Base Board
1x RAK 3401 Core Board
1x RAK 13302 Lora Boost Module
1x 107mm x 61mm Solar Panel (Aliexpress)
9x M3 x 4mm Heat Set Inserts
3x M2.5 x 4mm Heat Set Inserts
Clear RTV Silicone (to seal in solar panel)
1x 6x9x1.5 O-ring (SMA connector seal)
Please Note:
USB Blank and Lid Gasket should be printed out of TPU or other flexible material
Consider ASA or other UV resistant material for external components
Happy Printing!