Cursor IDE Keychain
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small fan-made Cursor-inspired cube keychain designed for 3D printing.
The model has a simple rounded keychain base with a raised geometric cube mark and cursor/paper-plane shape on top. The logo details are modeled as physical relief, so it prints in one piece without needing color changes. The cube lines were made thicker so they survive slicing at this small scale.
Print flat on the back side.
Recommended settings:
- 0.4 mm nozzle
- 0.12-0.20 mm layer height
- PLA or PETG
- 3 walls/perimeters
- 10-20% infill
- No supports needed
- Use 100% scale for the included STL
Notes:
- The STL is already scaled for keychain size.
- Avoid scaling below 100%, since the raised logo lines may become too thin.
- Optional: use a filament change near the top layers if you want the logo to contrast with the base.
Unofficial fan-made model. Not affiliated with Cursor.