1 / 9
Replacement Safety Lever for Cuisinart 14 Cup Food Processor — image 1
1 / 9

Replacement Safety Lever for Cuisinart 14 Cup Food Processor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fix the bowl of your Cuisinart 14 Cup food processor model DFP-14BCNY with this sturdy replacement safety lever

Rating
0 / 5
Likes
0
Downloads
26
Makes
0
Views
120
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replacement safety lever for the bowl lid of a 14 Cup Cuisinart model DFP-14BCNY. The one on our 3 year old food processor was cracked and about to fall to pieces, so I designed a new one.  For a $320 appliance, this part is criminally flimsy. Also, you can't buy a replacement safety lever, but you can buy a new bowl lid for $30-60 USD. 

Note: The safety lever is held in by a plastic pin which (thankfully) can be gently removed with needle nose pliers and some patience.  Careful not to damage or lose this plastic pin. 

Make sure the ramped ridge faces downward when the bowl is assembled. 

Printing instructions: Print it solid, with support touching the print plate only.  I printed it with the ridge up and the pin hole horizontal. 

Post processing:   The plastic pin in the bottom of the bowl slides over the ridge on the bottom, so sand the ridge with medium fine sandpaper (180 grit or so) to make the action smoother.

You may have to open up the hold with a drill bit, depending on your printer tolerance. The lever should move freely over the pin. 

Tags