Blind acorn / cord pull end with holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Large grip-friendly window blind pull end with holder and anchor.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Easy to grip pull end (size is 50 x 20 mm) that can take a bit of a load too. The load from the cord is distributed evenly inside the handle via the wedge that inserts from the bottom.
Included is a holder (long and short models) that are affixed via two 4.3 mm counter-sunk screws, and lets you hang the pull end anywhere you like. With enough infill and walls they can be made to take the load of the blind. Print with narrow surface down, but activate support for the screw holes - and have fun removing them..
A simple two-piece anchor (for looping only - does not pinch the cord) is also included, also takes a 4.3 mm counter-sunk screw. These are best printed with the mating surfaces upwards, and ironing of all surfaces enabled.
Prints well with PLA (although PETG might be safer in the long run), and using fuzzy skin (as pictured) can further make the pull end easier to grip.