Counting matching models…
Protractor (or goniometer) which can be used by blind users because of the tactile elements. model is also on Tactiles.eu, a database with 3D models specifically for people with vision impairment.…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
Horizontal blinds controller - no more hanging chains on windows. To open the blind, just turn the controller. To connect both parts just insert a piece of filament. You can choose two designs of rotate part. The static part is the same.…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Simple cord pulls that were printed with PETG. These were made to replace missing cord pulls of the same shape. The center pull in the picture is an original pull made out of wood.
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
I made a holder for the wooden slats on the terrace.
These pulleys are designed for chain drive roller blinds. The original pulleys supplied with the blinds often skip steps, are noisy and do not support larger and heavier blinds. Use the pulley corresponding the size and weight of the…
Valance clip for Levelor Trim+Go window blinds. An OEM clip broke quite quickly. This clip is stronger (thicker support section). I printed in PETG vs PLA for extra flexibility and strength. Please make sure that you are selecting the…
I've printed it with a .4mm nozzle, .1mm layer height in PC. Other settings and materials probably work fine too.
Flat sided - to print on its side for layering strength. The number on the bottom of the original pull tab - P15BH2 I included a 5mm thick test part so you can check the fit before final printing. I'm not sure if there are more than one…
I got tired of dealing with the flimsy designs for the Blind Shaker Mount so I designed my own. Not only is this design stronger and more rigid, it also allows for the shaker to be held in two different ways. 1. With the lid on top held…
A clip for attaching the trim piece to the top of Levolor window blinds. Two different versions included but V2 works better in most cases. Printed in clear PLA at 0.2mm layer height.
Skoda Octavia 5e Blindstopfen Anhängerkupplung
Support needed. It might be necessary to thicken some parts of the model when printing with FDM (because of the weaker layer adhesion in Z-Axis). I have added a second version for that. Use ASA, ABS or similar material to prevent…
These templates are made for those who are blind or visually impaired for when they will need to sign their name on a line to ensure that the signature is actually on the line as some legal documents won't be accepted if its outside of…
Two different type of end caps for the bottom rail of zebra blinds. Unfortunately I do not know the name of the brands they fit.
I tried to make a version of a mechanical liquid level detector for the blind and visually impaired, which does not require batteries or any additional spare parts. I will be very glad to any comment from users A very simple device: When…
Holds the string of window blinds. Print instructions 1) Print same orientation as the picture 2) Nozzle 0.4mm > as a draft (0.3mm) but you can print with more detail (ex 0.15mm) 3) Possible to print more than 1. I like to print a 3x3…
This 3D-printed signature guide card helps visually impaired individuals sign documents accurately. The card is easy to hold and features a cutout where the signature should be placed, ensuring correct positioning. Its ergonomic design…
Window Blind Cord Safety Cleat (Mini) A compact, low-profile cleat for wrapping and securing blind cords — keeps things tidy and helps reduce dangling cord clutter. 🪟 Compact • 🧵 Cord Tidy • 🔩 Screw Mount Small but practical. This mini…
this cube is used in various Situations People shoudt find the shape called out "Place the Most Round up" "Find the rectangle" Triangle ... Can help people to train there Brain after stroke SIMPLE FASTprint
I have developed a motor controller for the IKEA Fridans Blind. But you can also control any other stepper motor with it. I found the motor bracket on Thingiverse (https://www.thingiverse.com/thing:4889111). I designed a case that…
With this model a blind person can measure or draw the same thing a sighted user can with a triangle protractor because of the tactile elements. you can: measure and draw 90 degree angles measure and draw lines of 1 cm. measure and draw…
Este diseño es un soporte de montaje para persianas de ventana, pensado para fijar de forma segura persianas enrollables u otros sistemas similares al marco de la ventana. El soporte proporciona una sujeción firme y estable, facilitando…
Print with 0.2mm profile, Arachne wall generator and Manual supports.
This haptic 3D-printed educational aid helps blind children develop fine motor skills and shape recognition. The set includes columns where students must sort and place squares, triangles, circles, and rectangles based on touch. By…
For the 1-inch Levolor Wood Blinds to hold the facade / trim over the mechanics. I had a number of these break over the years so this easy print is an easy way to get a new one. In the picture with both, the upper is the original and the…
These mini wine glasses add some functional and classy flair to your fridge! Designed for a small circular magnet that's 1mm thick and 3mm in diameter, but model can easily be adjusted to whatever magnets you have on hand by putting a…
This haptic 3D-printed educational aid helps blind students understand fractions through touch. The set includes fraction pieces representing eighths, quarters, thirds, halves, and three-quarters. Each piece has a distinct size and shape,…
Memory Sensoriel Découvrez un memory sensoriel pensé pour les enfants, alliant jeu, découverte et stimulation tactile. Ce jeu a été conçu pour être accessible à tous, y compris aux personnes aveugles ou malvoyantes, en mettant l’accent…
I remixed a model to work on my windows with blinders. Feel free to remix it as well for your own needs.
RUS Инклюзивный проект “Доска и фишки для игры в Го”, для слабовидящих и слепых. Сделано в Фаблаб Москва в сотрудничестве с клубом "Го без границ". Набор протестирован и используется для игры в Го на инклюзивных встречах по игре в Го в…
All the measurements fit into a standard type d mounting in studio and live rack cases. Print with supports of your choice. Iron for more pretty surface. Can also be adapted for different use, like i did here:
Designed to fit a chain with 3mm diameter beads spaced by about 1mm. Three versions for optimal fit (looser-normal-tighter) with different top surface details to tell them apart. I recommend to print one of each for test-fit. A small hex…
This haptic 3D-printed educational toy helps children develop shape and color recognition through touch and vision. The cube features alternating high-contrast colors and uniquely shaped slots, each outlined with a contrasting color to…
Fellow OPUS Shaker Lid – The Perfect Addition to Your Grinder Setup! Tired of messy coffee grounds? The Fellow OPUS Shaker Lid transforms your Fellow OPUS catch cup into a shakeable dosing cup , similar to the Weber Workshops Blind Shaker…
This 3D-printed educational tool helps blind preschool children learn and recognize different geometric shapes through touch. The set includes various shapes, each available in both a large and a small version, allowing students to…
This PLA badge is an important aid for blind and visually impaired people! The badge is attached to clothing with a magnet, making it easily visible. This way, those around you are aware of your visual impairment, and you can expect more…
Replacement blind cap for Sheaffer snorkel fountain pen. Fits a 2.90x1.78 o-ring to seal it up. Printed with 0.4mm nozzle and 0.12mm layer height in PETG
You can grab a code and get more info about the project here https://github.com/Andryushik/blinds_homekit_esp32 Created for regular window blinds. With Planetary gearbox (you need 3 x planet_gear for 1 set). You need three M3 bolts with…
The standard mounting for roller blinds doesn't hold well with double-sided tape, so I made a reinforced mount that can be attached using double-sided tape
This is a replacement clip for Levolor brand fascia cover. Printed in color to match cover at 25% infill, holds up great with multiple removals and installs. Support needed. Material added for strength to prevent breaking where factory…
Neberte to vážně, doslovný překlad je pouze vtipem
This haptic 3D-printed tactile math scale is designed to assist blind students in learning numerical concepts. The scale consists of a flat plate with 11 positions, ensuring it always starts at zero. Braille numerical labels can be…
Haptic 3D-printed educational tool which helps visually impaired students learn shapes through touch.
It's my very first project. (please be gentle) :-) I tried to change the original with 'tinker cad' online For the settings I used : - Wall loops : 5 - Sparse infill pattern : Honeycomb - Enabled Support : YES Style : Snug
This 3D-printed Braille learning tool is designed for blind preschool and elementary school students. The model is shaped like a rectangular block with six holes, where standard hardware rivets can be inserted to form Braille letters. By…
Replacing part for blinds. The original one was weak and snapped. Adjust width accordingly to your window size.
Koppelclip / Verriegelungsclip für Fliegengitter- und Verdunkelungsrollo im Wohnwagen Ersatzteil für Kombirollos bestehend aus Fliegengitter und Verdunkelungsrollo. Der Koppelclip verbindet beide Rollos miteinander und ermöglicht…
Model of Blind Side Sonny Bloggle from the latest Vaxis III arch. This can be printed with any settings you feel most comfortable with. I used the 0.20mm Standard @BBLX1C preset with my Bambu X1C but changed the Bottom surface pattern to…
The original tassel fell apart. I printed in PLA - there is no way it'll be worse than original. Ideally you should print in PETG, but if you only have PLA don't hesitate to use it. Worst case scenario you replace them every 3-4 years.
Have some zebra blinds from Walmart but don't recall exact brand name anymore and don't see an obvious label. The end caps have a tendency to fall out unless glued in place. So I made a replacement with some slightly oversized features to…
Spare part. PETG 6 walls Support yes
I have pleated blinds in my home. Some of them are quite wide, and the manufacturer installs two handles on each side. However, if it is hard to access both handles, you cannot easily move them. This is a handle I printed and placed in…
spare parts for roller blind printed in PLA
TomTom Assistant Sunblind Holder , Printed in PLA+ with Supports
Sturdy Wall Mount for SmartWings Smart Window Treatments Remote Control. The stock wall mount is barely functional at best. I recommend printing this in white PLA+. Print standing up for the fastest print time and fewest supports needed.…
Simple tab for bottom of cordless blinds. Something easy to grab while reaching over to raise or lower blind. Attach to bottom of blind with 3M or other mounting tape, no drilling. Print Settings Printer Brand: Prusa Printer: i3 MK2 MMU…
An old blind guide in my neighbor’s house broke. I created a new, improved version that can restore functionality using a toothpick, a beverage can, and a few small screws.
I bought these blinds very cheaply from amazon and automated them using Nema17 motors and ESPHome. Many cheap blinds come with exactly the same layout. You will need some experience with electronics to make this project work. Components…
Holder compatible with a blind shaker up to 74 mm or the original DF64 Metal Coffee Cup. Diameter: Up to 74 mm Attachment: Uses the original screw from the portafilter fork Features: Slot for a 10 x 1 mm magnet at the base Blind Shaker:…
16 tiles 16 tokens per color (i.e. black, white, red, blue) For the tiles, choose a color with high contrast (i.e. light green). 10% infill No supports For tokens, I suggest to use high quality print settings and Ironing. For tiles, I…
Ein Deckel für Löcher mit 60mm Innendurchmesser z.b. für Kabeldurchführungen
The clutch was a bit redesigned (less sharp edges) and print settings was optimized in order to reduce efforts to insert blinds beads. Print parameters: 0.16mm layer height, 2 wall, 15% rectilinear infill It was printed in PETG (to…
Simply print and stick to the bottom of your blind opener to stop your blinds getting caught. Designed to fit the Moes ZigBee blinds opener, should fit others too. Printed narrow so the ports and open tab can still be accessed. Scale it…
Use case This is a roll-down blind bar end piece that I created to replace the original ones that didn't fit in the metal tube. Impression For more solidity I recommend printing in PETG or ABS. Please give this design a like if you like…
Blind cover (Blindabdeckung) including support ring (Tragring) for the Jung LS 990 series. This aims to replace LS 994 for hiding unused pattress boxes (Unterputzdosen). Requires an additional frame which is held to the wall by clicking…
Replacing part for blinds. The original one was weak and snapped. Adjust width accordingly to your window size.
Replacement blind cap for Sheaffer snorkel fountain pen. Fits a 2.90x1.78 o-ring to seal it up. Printed with 0.4mm nozzle and 0.12mm layer height in PETG
Simple cord pulls that were printed with PETG. These were made to replace missing cord pulls of the same shape. The center pull in the picture is an original pull made out of wood.
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
It includes an integrated hook for guiding or securing the control cord (nylon line). Designed for a snug fit and easy installation—no tools required.
It's a puzzle, but instead of a picture, i printed the Braille alphabet on the pieces. It can be used as a nice gift for blind friends or relatives. The 2 dots on the left upper corner (the horizontal and vertical sides of the frame),…
I have several blinds around the house that use the Eve Motionblinds upgrade motor. My issue is that for the 38mm tube, especially the single slot version, positioning the motor centrally in the tube can be hit and miss. The motor itself…
Remix of @DaveDUtah_155970's adjustable blind spot mirror mount for my 2024 Hyundai Kona EV. You'll need to remove the corner panels from the doors and clip one socket side of the print around each. This will be held in place by tension…
NOT for HV wiring! Check your local laws for the use of materials etc. for cable covers! There are only a few filaments that you should use for high-voltage covers. PLA, PETG, ABS, ASA, etc. are NOT suitable here! Cover and clip are just…
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
🔥 Her eyes were burned out by the zealots of the Black Sons of Loyola, a punishment meant to silence her forever. But instead of death, it birthed something far worse. 🩸 Taken in by the Vultari Syndicate, Ilyss learned to hunt without…
Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm The Model is 200x199.8mm in size You may print at higher layer heights below the Base Thickness of 2mm The Max allowed Thickness is 3.8mm and the Actual…
Replacment roller blind winder bracket for Aluprof. Ive broke orginal one and you cant buy at shop replacment parts, you need to buy whole thing.
A detailed sci-fi female bust featuring a blindfolded warrior holding a glowing energy blade.
The little plastic retainer/tensioner part for the cord running down the height of the window, for "tiltable" blinds.
Instead of using supports, I took a technique from Angus (MakersMuse https://www.youtube.com/watch?v=RPijCjz9G1w ) and added eight 0.2mm thick cylinders. Each located at a step overhang in the screw holes (2 per hole). This allows the…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Strangely the blind covers (needed when the outlet is unused) for EdizioDue outlets are not very available and almost as expensive as an actual outlet. Since I prefer the screwless type and I couldn't find it, here is my own version of…
All the measurements fit into a standard type d mounting in studio and live rack cases. Print with supports of your choice. Iron for more pretty surface. Can also be adapted for different use, like i did here:
Blindfolded sorcerer silhouette DXF for laser cutting. Fan art — personal use only.
