YF-23 Black Widow II print-in-place micro jet fighter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small, simple and easy to print 1/320 scale fighter jet model.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 134
- Makes
- 1
- Views
- 437
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
About the YF-23 Black Widow II
The Northrop–McDonnell Douglas YF-23 is an American single-seat, twin-engine, stealth fighter prototype technology demonstrator designed for the United States Air Force. The design team, with Northrop as the prime contractor, was a finalist in the USAF's Advanced Tactical Fighter (ATF) demonstration and validation competition, battling the Lockheed-led YF-22 team for full-scale development and production. Nicknamed "Black Widow II", two YF-23 prototypes were built.
In the 1980s, the USAF began looking for a replacement for its F-15 fighter aircraft to more effectively counter emerging threats such as the Soviet Union's advanced Su-27 and MiG-29 fighters. Several companies submitted design proposals; the USAF selected proposals from Northrop and Lockheed for demonstration and validation. Northrop teamed up with McDonnell Douglas to develop the YF-23, and Lockheed, Boeing, and General Dynamics developed the YF-22. The YF-23 was stealthier and faster, but less agile than its competitor. After a four-year development and evaluation process, the YF-22 team was announced as the winner in 1991 and developed the F-22 Raptor, which first flew in 1997 and entered service in 2005. The US Navy considered using a naval version of the ATF as an F-14 replacement, but these plans were later canceled due to costs.
About the model itself
You can find hundreds of fighter models on the Internet.
Some of them are, however, a faithful reproduction of the machine itself, but such a model is not great to 3D print (because of the thin wings, complicated engines and landing gear, it needs tons of supports etc.).
On the other side there are simple models of aircraft that are easy to print, but no longer represent the original plane.
I tried my best to create something in between, a model that is both easy to print and looks like the real aircraft. I spent a lot of time to adjust the wing thickness, the acceptable landing gear design and the optimal way to get rid of default supports and to make the plane look so reliable that even a person not interested in aviation could tell the difference between several models.
Printing
High quality settings, 0.12mm-0.15mm layer height (I am using 0.12mm)
0.4mm nozzle
NO supports (unless you choose a version without them)
100% infill
I reccomend to use raft to ensure that the model will not peel off mid-printing.
Printing (on my 3D printer) takes from 1h to 1h 40minutes depending on settings, printer efficiency and the size of a jet.
I recommend NOT to scale down the model, because some parts (air intakes, engines, nose) might be deformed, or not even printed, because they will become too thin for the slicer and printer. I also do not guarantee good results when scaling up.
Cleaning the model
Here's a small instruction how to remove the unnecessary parts after printing.
The photos show a MiG-29, but the instructions apply to all models.

First, remove the raft with side cutters.

Then find the gaps in the wings (marked with red arrows). Don't forget about the engines and stabilizers.

CAREFULLY break the supports with pliers, I do not reccomend to use hands, because the wing may break along the layers, not where it should be.
Remember, that even if that happen, there is no need to print the model again. Sometimes it is enough to glue the wing with superglue.

You can also smooth the wings with a small file or sandpaper and burn the strings with a lighter.
Additional information
If you enjoy my micro jets, leave a nice comment. I am working on some new arcrafts I will be uploading soon. I would be grateful if you would share with me your ideas for new fighters or something completely different. I am open to your suggestions.
I would just like to point out that I am not a professional and I treat creating models for 3D printing as a hobby. Therefore, I am asking for your understanding towards my work.