Counting matching models…
Disclosure: Although the license for the 270 hinge adapter is restricted I have received permission from @Diablo_1609422 to remix it, which is located here K1C Adapters for use with V2 and V3 270 degree hinges . The license is why it…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
If you like what I do here, come visit my (German) Facebook group. 3D printed Grow Tools & Accesories - free .stl changelog: v1.1 - changed diameter, so it can be scaled up to 133% for a 8mm version and still fits on mk4s - added a…
New race body for Experimental Chassis of RUDE. Version 1.0 Chassis attached as reference. Can be printed both standing without supports and laying flat with supports enabled. If you would like to support me - you can buy me a coffee :)…
Watertrap cylinder with 18,5mm diameter that is connected with a 10,0mm (inside diameter) hose to the blowpipe.
So the s400 uses some of the space between the foregrip and trigger as additional spring space. That could mean more potential draw when translated to a Lynx. Only problem is that it completely breaks the trigger linkage, and I'm not keen…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl EXPERIMENTAL !!! mounting solution for activated carbon filters of every size…
🏁 Experimental Parametric TPU Tire Inserts – The Future of RC Traction Tired of foam inserts getting soaked, rotting, or developing flat spots? This experimental project brings a 3D-printed solution for the entire RC community. Whether…
Heres an obscure one for ya, this is HIBEX, an INCREDIBLY fast missile used to intercept incoming warheads from soviet ballistic missiles at the last minute. For this reason it had to be faster than fast. It could withstand accelerations…
update 6/1/2026 - the more rigid ab mounts seemed to have resolved the x beam racking, however... unfortunately when i had first caded this up, i made some of the holes on the o.g motor and front mounts a little oversized. initially this…
This design of PIP Swivel allows limited rotational movement between two parts of a 3D printed model. It consists of circular disk and shaft that is free to rotate in the fixed part, and constrains the movable part to rotate around the…
A carrier deck for https://www.printables.com/model/878813-small-sinkable-battleship/files Not tested, will update when I have.
My latest airplane fixation is on Barnaby Wainfan's underdevelopment FMX-7 BatRay. It is a two seat, tube-and-fabric construction, low aspect ratio aircraft and a progression on the ideas pioneered in his one seat facetmobile that first…
If you like this project, feel free to join my Discord. That is where the Canna-Cup 2026 takes place, where we compare results, share experiences, and continue improving projects like this together. Discord: MX-creations (German+EN)…
komik olur diye yapmıştım ama gerçekten çalışıyor. saç tıraş ederken saçların etrafa dökülmesini önemli seviyede azaltıyor. aşırı deneysel olduğu için öneremem ama belki geliştirilebilir.
Modification for this project: to make it a 12h clock. Marked as "Experimental" since i haven't tested it yet.
You can use a plumb line to determine the position of the model's center of gravity.
This is an experimental adapter that I made up to allow the Mini-14 to use AR-15-type grips. It would be best printed in metal or CNC machined from metal, as I do not think plastic would withstand the recoil. Note: The holes must be…
It is still experimental! For now, please only print it if you own a 3D printer. I'd be happy about feedback. This is a switch puller for Kailh Choc V1 (PG1350) Switches. It will only work with switches in a plate. Layer height doesn't…
Upper holes are bored with Hümmelchen proportions to show if semitones are still possible on this chanter length. Some corrections in spacement are done but it based still on the bass chanter of the Sordellina in F. Sordellina Bass Reed…
Started as an experiment to see if I could create some new shapes. Starfighter not related to any particular franchise. Category: 3D Printing
01.06.25: Maybe the same problem as the Flute in D that the whole scale/ fingerhole spacement ist one note to low. 03.06.26: Model is no longer available.
04.02.25: Part 3 & 4 are now added without the finger grooves. 16.02.25: Part 2 with new Windway design is added. 14.04.25: The windway on the alternating part is now a bit less deep for a lower need of air, the holes 5# and 6# are quite…
Contrabass Drone Flute in F inspired by the work of Miguel Medina and based on the parameters from https://www.flutopedia.com/ First hole of the lower hand is turned backward because the finger spacing. 16.02.25: Part 2 with a improved…
Silicone ring, rubber band, cork or teflon foil must be added on the tuning slide.
High E Whistle based ont the Low Tech Whistle measurements. Fipple design similar to the Carbony Whistle.
High Eb Whistle based ont the Low Tech Whistle measurements. Fipple design similar to the Carbony Whistle.
High C Whistle based ont the Low Tech Whistle measurements. Fipple design similar to the Carbony Whistle.
Bb Whistle based ont the Low Tech Whistle measurements. Fipple design similar to the Carbony Whistle.
With hole for the pinkie (D) and bottom note B to play minor tunes.
List of materials BMG set Idler arm from a sherpa mini M3 inserts with an diameter of 4.1mm (Mellow brass inserts were used) Notes: chop down the heatsink for those measurements
Ever wanted to be different? Ever wanted to stand out from the rest? Well then this phone stand is for you! This phone stand is meant to save filament, and be cheap to print. WARNING Like most thin plastic things, this thing FLEXES. Even…
Based on the Low Tech whistle with fipple design similar to the Carbony Whistle
Alot A Whsitle based on the Low Tech Whistle measurements. Fipple design similar to the Carbony Whistle.
Disclosure: Although the license for the 270 hinge adapter is restricted I have received permission from @Diablo_1609422 to remix it, which is located here K1C Adapters for use with V2 and V3 270 degree hinges . The license is why it…
Reed tongues should made out of carbonfiber but can maybe work out of other materials, too. Elderberry wood (traditional), spindle tree, cane, fiberglass or plastic are possible.…
Free reconstruction that I made after research about Henry Starck and his legendary bagpipes. Chanter in the key of E (lowest note D). Fingering like a Tin Whistle or Irish Flute/modern Flute. Drones in Bass E, Baritone B, Tenor e. Long…
This is an experimental open-frame PC case built using old PC parts. It's a fun and challenging project for anyone who enjoys tinkering with hardware. The open-frame design allows easy access and customization while creating a unique and…
Literally the experimental ocarina but with a lanyard strap so you don't drop it in a pile of snow and lose it until your brother finds it in the grass near the pile of snow after the snow melts
This is a complete box replacement for Pandemic: The Cure with or without the Experimental Meds expansion. Everything has been sized to get to as small a footprint as possible. This box is easy to pack for vacation or game night and…
Here is a travel box for Pandemic: The Cure. We took The Cure and Splendor on our family vacation to Seattle last year, and while I had a nice 3d printed box for Splendor, we just relied on the bag for The Cure. Since then I've been…
This model is more for idea than for practical usage. It worked to some degree, but it definitely requires modifications.
1/6 of total size taper with 1:33 and the rest of chanter with a 1:26 taper. Throat 4,7mm. Sound volume should be similar to a Borderpipes in A = 95-100 decibel. Should sound similar to this one:…
This is an experimental version of my Ender 5 ModMax v02 design that adds AWD (4 steppers for XY movement). These parts are incomplete and not fully functional yet. I'm posting them to share with interested people, show my progress, and…
Archetype toolhead ( Experimental Branch ) for Ender belt path. Requires MGN9 rail on the X gantry, see this for a no rails version Updated version of this, for the Archetype Experimental branch . Belt mount & belt mount end: updated belt…
Parts Intended for Archetype Experimental Branch bltouch_mount_medium: Uses the 2510 fan screws to also securely mount the fan cover, which the bltouch bolts to. Extra Bom: 2x Heatsets 2x M3x6 BHCS (mounting the bltouch) Probe Offset: X =…
Archetype Experimental Branch core mounting block that accepts a Dragonfly BMS. Hotend sits at Short duct height by default, add 8.5mm MZE to reach Medium or Large. Extra BOM: 2x M3 Heatset 2x M3 Bolt (These should have come with the…
This is an experimental model for a headrest mount that uses the small AbleNet Candy Corn switch. It hasn't been tested yet, and there are likely issues with it. I don't recommend using it until it is finalized.
I have not printed this part yet - I'll update this description when I do. Use with caution. Print four each. Recommended print settings: Material: PETG Layer Height: 0.30 mm or less Infill % : 15+ Supports: Yes Support Type: Any Print…
With the Prusa CORE One they introduced a new way of guiding the cables and filament to the extruder, something they call the SwingArm. I've remixed the design to make it compatible with the K1/K1C, when using this Lid Riser . Any other…
This design is an experiment both in CAD and in printing the CAD design (see below for more information on the special printing configuration). I plan to use this design (or possibly a variation of it) on a future print I am planning, but…
The idea behind this dart cup is to keep the dart more horizontal as it accelerates out for the gun. Normally, the dart tips toward one side, with the head rubbing the inside of the barrel on the way out. This should keep the dart…
experimental self-closing tweezers to hold stuff in place while I solder it. Version 1.0 in various sizes. Feedback welcome. So far they don't work very well, as most filament does not have a lot of grip and parts slip off the tweezer.…
Suitable Drone and Blowpipe: https://www.printables.com/model/1072888-bulgarian-bagpipes-kaba-gaida-in-e-experimental Chanter Reed Bodys: https://www.printables.com/model/752650-bagpipes-reeds-djura-gaida-chanter-carbon-reeds
Add a aluminium tube 12,0mm x2,0mm, length 44mm to connect the mouthpiece. Closed/half-open fingering like a bagpipe, fleahole included. Adding an overblowing key can extend the tonal range. As the tapered bore is identical to the bagpipe…
This is an experiment, if you do try this then it will be at your own risk. Decided the stock speakers were bad, so I ordered some iPhone 15 Pro speakers to mod into my T480 as an experiment. The speakers are held in with friction and…
A basic 3d model of the X-43 A experimental aircraft used by NASA to test scramjet technologies the model is full scale but is designed to be scaled down at about 1/10 to 1/20 scale and 3d-printed this includes a version of just the plane…
A model of the Boeing X-37B a still relatively secretive experimental spaceplane built by Boeing for the US Airforce the model is full scale but designed to be scaled down and printed anywhere between 1/20 and 1/100 scale
Can be used for Queues, wands, sticks, spiundles and musical instruments or chair legs. Needed spare part: https://www.wabeco-remscheid.de/bohrstander-zubehor/zubehor/maschinentr%C3%A4ger-1127.html
What and Why I don't know how people are aligning wheels on Gryphons. So I made this to allow an alignment spacer to be used under the wheels. Untested I have not tested this. The parts will fit, but vibration? Is it a problem? If so, it…
Can fixed on a desk or mounted on spindles for high adjustments or on rods with ball joints to create different angles. 4,0mm bores on the Module 1,0 gears. Materials needed: 24x M4x20 188x magnet balls diameter = 6,0mm 360x round magnets…
Uploaded at the request of an inquisitive redditor, this 9 sided polyhedron is created with the intended use as a basis for a 9 sided die. This die has not yet been tested for fairness, and there is no mathematical proof of fairness, so I…
For a long time now I've wanted to make parts that intentionally fail at different temperatures. PCL is a very soft, very flexible filament with a VERY low melt point. Normal printing is in the range of 70-100c which is why it's used in…
An attemp to create something useful (rather than decorative objects and toys) with UV color-changing filament. The design is meant to be partially printed with regular plastic that matches the “shade color" of the color-changing…
Flywheel designed to fit Xing 2207 motors. Might also be compatible with T19/Spirit. Requires good layer & line adhesion to print properly. Ensure your process can print steep overhangs. (Otherwise wheels will be very unbalanced.) I use…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
This is a sudden idea that I come up with when creating my universal cover with case. I though, how could I use the case but with community cover? and here are what I come up with, theoritically it should be possible. To use this, just…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
Propeller powered by turbine (Experimental) FREE Its free because its EXPERIMENTAL Model.( it is not perfect) Turbine can rotate high speed , be Carefull . If its not balanced properly the vibrations can broke the holder . I bear no…
Spheres are notoriously hard to print. This is an experiment in leveraging print in place mechanics and a 3D printers' strengths to make a perfect sphere in one piece. This is also a fascinating print to play with! Just print! The model…
If you like what I do here, come visit my (German) Facebook group. 3D printed Grow Tools & Accesories - free .stl changelog: v1.1 - changed diameter, so it can be scaled up to 133% for a 8mm version and still fits on mk4s - added a…
V77 of the Limits Ender 3. This will eventually be outdated and should only be used as an example of preferably, what not to do. Produced from a variety of custom files, and files that belong to their respective owners. This model is…
I really need a cheap set of practice sticks I can rely on for my marching tenors so i will be uploading and tweaking the design on this continuously until they are balanced and weighted. Extra hardware may be needed with the final model…
This weird barrel was a combination of mine and my dads ideas of a weird, tactical, Sci-Fi barrel. You have the option to either use the barrel shroud with or with ought the barrel cover included in this listing. The shroud is compatible…
Jammed during a game and then fell out. Didn't notice Evan had already made one so use his instead https://www.printables.com/model/1365018-trigger-pull-reducer-for-x-shot-pro-mpp-aeb-motori/files Shim the trigger switch to engage faster…
This is an experimental auto syphon I designed, inspired largely by mrmattandmrchay’s YouTube video on auto syphons. I originally created this model a few years ago and decided to share it in case anyone would like to build and use it for…
Print upside down and paint it to match your favourite shader ;) Enjoy!
It took forever, but I have manually ported over much of the Sovol Zero profile settings from OrcaSlicer to PrusaSlicer. This configuration bundle INI file should include the following: Printer Config: SOVOL Zero - SV Zero Print Settings:…
Hijinx+: Replacement pump assembly and plunger to extend the draw of the Lynx near/past the limit of what k25 can do. Will likely cause k25 to settle a little from the additional compression, but most blasters push beyond the elastic…
New race body for Experimental Chassis of RUDE. Version 1.0 Chassis attached as reference. Can be printed both standing without supports and laying flat with supports enabled. If you would like to support me - you can buy me a coffee :)…
I’m not a designer, just had this idea and it worked. its Stealth Changer for Trident or similer CoreXY. I’m still working on it and trying things out. It hasn’t been tested enough yet, and it can definitely be improved, but I’ve reached…
Ok people, another Rush Hour thing. This version has a minimalist design, for us that don't like cars and trucks and prefer simple shapes. Print suggestion for the classic fun: 1 of 6x6 board 10 of Piece S2 6 of Piece S3 1 of Piece S2 in…
LED strip adhesive is notoriously bad, so this is a fixture to hold the LED strip physically and is glued into the upper cover of the MMU BOX to prevent the LED strip from drooping.
This is a draft - I'm printing it now to test it. It is meant to fit together with 1ft long grow lights. I'm printing it with PLA Plus for convenience, but I would suggest using at least PETG so that it can withstand the heat. This model…
Experimental - sabot rounds that hold #4 buckshot. Intended for use in the Franklin Armory Antithesis platform. The key on top is intended to help assembly. Recessed bases for gas checks.
The key of Eb should sound more brilliant than the key of D. Suitable for Eb sessions, to play with brass instruments or clarinets, eastern european and alpine folk music. Drone setup: For the Eb drones, the uploaded D drones should work…
Most measurements are from this borderpipes chanters: https://lbps.net/j3site/index.php/common-stock/archive-issues/348-december-2000 Possibly overblows one or two notes because of the narrower taper beneath the throat. 18x 2x4 Bolts/pins…
3030 Connector 4-Way Corner Bracket _Profile 3030 Experimental Suitable for: All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If you downloaded and enjoyed this file,…
I have a fairly unique setup where there is a lot of space above my 3d printer with the ability to feed filament directly from above into the hot end, the default MMU3 setup doesn't really support this very well. I made this adapter which…
This is an experimental and untested mount for the Dragon Burner toolhead on the Prusawire 3D Printer. The mount is derived from the Dragon Burner Switchwire mount CAD as well as the Prusawire 2025.B1 CAD. Dragon Burner:…
Watertrap cylinder with 18,5mm diameter that is connected with a 10,0mm (inside diameter) hose to the blowpipe.
Final Edit (19 Dec 22): Added .step files for the model. :) Enjoy Edit (24 Mar 22): Added v3 of the adapter. I made the tolerances a little too loose on the last one, so I brought the inner diameter of the adapter back down. I also…
I made it with a Ball generator that I am working on uploading soon. I will post updates on: https://www.youtube.com/@randotechnerd or you can hop in the discord if you want to chat: https://discord.gg/8fjQHDX8PQ or email me…
![[Experimental] Kailh Choc V1 Switch Puller](https://media.printables.com/media/prints/222949/images/2038495_66998148-ec2b-405b-a55c-6b11be07f2b3/dsc07159.jpg)
![[EXPERIMENTAL] Headrest Mount for Small Candy Corn Switch](https://media.printables.com/media/prints/1188557/images/8935877_bad6bf69-7586-4c0e-b69a-0af861b0ea45_d2a5143a-f0ce-473f-b454-9709ca39a6c2/candy_corn_headrest.png)
![CMF Phone 2 Pro - Modular Case [ Not Tested | Experimental ]](https://media.printables.com/media/prints/090a3ce7-49da-49d9-9544-b0ba56003271/images/10012772_04d10121-e695-4967-8ba9-c7e2fec5a588_97b06012-cda5-4add-a26f-c311b6e8c15e/screenshot-2025-06-14-101803.png)
