Experimental Bridging Hot Air Balloon (1,100 bridges)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brims recommended. Use "Classic" Perimeters for gcode, works better.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 88
- Makes
- 2
- Views
- 669
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
USE BRIMS - SLOW DOWN AS YOU GO HIGHER - MAY POP OFF PRINT BED
Based on earlier learning with Air Trees https://www.printables.com/model/340401-air-trees-easy I wanted to see what was possible at the upper end of the technique.
Recently I went for my first hot air balloon ride and it inspired me to create this shape.
This model has 1,100 bridges & an internal girder frame. It's designed specifically for .20mm layers.
Scaling: If you scale to 75% and change layers to .15mm it might work. Same with 50% scale and .10 layers although I'm not sure that will work.
I was at 90% and I tried to add some support and popped it loose myself.
===========================================
Too much? Try Air Trees! (Below)

https://www.printables.com/model/340401-air-trees-easy