Sun shade for remote controller of drone
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.78 – €0.96 net (excluding VAT)
For file: SunShadeForRC_0.25mm_PETG_MINI_54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.87 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 54 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The model act as a sun shade to make the monitor visible in the outdoor.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 25
- Makes
- 0
- Views
- 457
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
Description
The sun shade for the smartphone on remote controller (RC) of a drone. The design is simple and easy to put in the carriage box.
Direct usage
The simplest way to use the shade is to tie the shade with two rubber bands.
Phantom 4 Pro RC
Place the shade on the top of the smartphone and clamp both the shade and smartphone simultaneously on the clamp of the RC (refer to photo 1 and 2).
Mavic Mini RC
When using on the RC of Mavic Mini, fix the shade with rubber bands on the RC. The smart phone can then clamp on the bottom of the RC (refer to photo 3 and 4).