1 / 4
Spool Holder Knob Extension for Qidi Q2 (or similar spool-holders) — image 1
1 / 4

Spool Holder Knob Extension for Qidi Q2 (or similar spool-holders)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This part helps prevent the spool from slipping off the holder while also making knob easiar to grip and handle

Rating
0 / 5
Likes
2
Downloads
22
Makes
0
Views
82
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

The extension is designed so that the original spool holder knob fits tightly inside it, meaning the stock part remains fully usable rather than sitting unused in a drawer.

Once installed, it provides more secure spool retention and reduces the chance of the spool accidentally coming off the holder. The larger diameter also makes tightening and removing the knob much more comfortable.

Convenient finger cutouts allow the original knob to be easily pushed out using your thumbs whenever needed.

Printing Instructions:

  • Any rigid filament material will work.

  • Print with the flat side on the build plate.

  • Enable supports from build plate only, and only for the base section (no supports inside the inner part, as shown on picture).
    The upper part prints well without supports; adding supports there, could make them hard to remove.

  • 3–4 perimeters/walls and 10% infill are enough.

  • I recommend using Outer/Inner wall order (outside-to-inside), as the tolerances are fairly tight.

If you run into any issues, please let me know and I'll do my best to help.

Tags