Star Trek: TNG Hypospray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple kit to build the hypospray from Star Trek: The Next Generation.
- Rating
- 5 / 5
- Likes
- 336
- Downloads
- 1,357
- Makes
- 23
- Views
- 4,269
- Reviews
- 20
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
Here is my version of the hypospray prop from Star Trek: The Next Generation. It has a vial you can print in clear material that connects to the unit with 6x2mm magnets. Supports are not required unless you have trouble with overhangs on the head part.
Includes display stand. Use color swapping for the tag. Here is a guide that explains how color swapping works, at least with Prusaslicer: https://help.prusa3d.com/en/article/color-change_1687
PLA colors used were Prusa galaxy silver, Prusa mystic brown, Ziro dark gray, and CC3D silk gold. The vial used a generic clear PLA and IEMAI clear green PETG for the contents.
April 28 2024 - Added a Voyager version of the display tag.
March 24 2024 - Added a tighter fitting vial lid that should be easier to glue but might be good enough without glue if not using magnets. Also added an alternate vial inner so you don't have to have the same amount of ‘fluid’ in each one.
August 18 2022 - added an attachment for the stand that displays 2 extra vials. It is called Stand Vial Holder. It should fit into the cutout on the existing stand base.
February 26 2023 - Added a connector with a looser tolerance for those who had trouble fitting it in the body.
Buy prints of this model:
Trekkie Time ebay - https://www.ebay.co.uk/str/trekkietime?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=L8JhI2TlS9e&sssrc=3418065&ssuid=L8JhI2TlS9e&stype=1&widget_ver=artemis&media=COPY
Trekkie Time Etsy - https://www.etsy.com/shop/trekkietime/?etsrc=sdt