Stackfinity - Home
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stackfinity is a set of Gridfinity objects that help with stacking Gridfinity Bins on bases whilst remaining stable.
- Rating
- 0 / 5
- Likes
- 49
- Downloads
- 36
- Makes
- 0
- Views
- 1,831
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stackfinity Home
Gridfinity is a great storage solution spec from the mind of Zac Freedman of Voidstar Labs.
One shortcoming (amazingly) that I found in the wider community was the ability to stack Gridfinity whilst remaining easily accessible when storing a large number of bins.
Stackfinity is about storing Gridfinity Bins onto bases that can then be stacked on top of each other, with sufficient support so as to not randomly disassemble everywhere. Support strength comes from a combination of a more rigid set of stacking bases as using your chosen Gridfintiy bin that matches the height of these handles.
If you like what you see and do makes, I'd love to see how this project evolves over time, so please share your makes for others to see!
Stackfinity consists of the following Models Sets
Stackfinity - Home - This Page
Stackfinity - Handles - Collections of Stackfinity Handles for Stackfinity Bases
Stackfinity - Bases - Single - Individual bases for One-Off base prints
Stackfinity - Bases - Stack - Stacked Bases for printing multiple bases at once (Coming Soon).
Stackfinity - Bases - Wire Shelves - Special Deep Bases that can be modified for Wire Racks (e.g. IKEA)
Stackfinity - Tools - Life improvement tools to make mass assembly easier.
Stackfinity - Labels - Edge on Labels for Identifying what's on the Stack Shelf (Coming Soon).
Stackfinity - <More to come in time!>
Printing
To construct a Stackfinity "Stack" of shelves, you need at least to print the following:
One or more Bases which may consist of:
A single Shelf from the Bases - Single (above)
A set of Shelves in one print (multi material) from "Bases - Stacking" above.
A pair of handles for each Base that you print in 1.
(optional) If you want to store Stackfinity on a Wire Rack (e.g. IKEA "OMAR"), then a non-slip base for the bottom of the stack.
(Optional) Print the Nut tool which makes assembly quicker whilst holding the M3 nyloc nuts.
Assembly
Stackfinity handles are bolted to each base using M3x12mm (minimum) bolts. you could also use M3x15mm or perhaps longer. These are available readily though discount sites like eBay, Amazon, AliExpress, etc.